aa-fords.com

Today was my first viewing of the "AA Club House" even though I've been a member for quite a few years now. I'll have to attend more often as it was quite interesting. However, I have a request based on my viewing a few posts. Please, if you have advanced information, i.e., already know da...

I'm really glad that you posted the photos as it shows that the "Express" rear fenders are not unique to the Express. They were provided on the other beds as well and most of the flatbed fellows threw them off as they were "in the way". I took note of the spare tire carrier and w...

OK, here's what I know. I went to look at a 1930 w/29 tin on it and it had "hyd" brakes. The job was accomplished by using a hole saw on the backing plate and drilling two holes to mount the hyd. cyl's. The brake shoes were modified to accept the brake shoe rods that the cyl. pushes the sh...

Shorthaul, I'm with Jimy. Henry shot the whole chassis black when it went down the line. If POR 15 is to expensive then shoot the whole chassis with chassis black from one of the vendors who provide products for automotive restoration. I personally prefer chassis black, especially if the vehicle is ...

Go to our archives. There is an extensive discussion on it. I believe you will find it quite interesting. If you would like to know about an oil that is quite effective, email me and I'll provide an interesting insight to this age old discussion. I don't have the time tonight, otherwise I would sit ...

Uh.......I've been involved in building a new shop and recovering from major back surgery. I'm close to having the shop completed which will allow me to grade, deposit crushed blue shale for a driving surface, install a new "seating fence", ect, ect., adinfinitum. I'm just the guy who stee...

Uh.......AA's don't have axle flanges. You would have to drill the hubs/drum. :^) The rear axle assy. is a 3/4 floater. Using adapters will would put the front wheels out of line with the center of the front fenders and will not work with duals on the rear axle to the best of my knowledge. It's fun ...

Jared, is that all he wants? There's one here (locally - No. CA) on a 157" wb that the fellow always wants $4K for it. The truck is just a cab and chassis, but all there. It will most likely sit out in the open until it rots to the ground. Shame, as it's still an applicable restoration. For how...

Possibly the cost of having the Ford script on them would make it prohibited. One must pay Ford to use their logo and script and that most likely becomes quite expensive unless you are dealing with volume. I'm not an expert in that endeavor, but that comes to mind.http://forums.aa-fords.com/posting....

These baskets are available through a Diana Craft of Waukesha, WI. Made from your specifications. Even over the arch of a rear spring if needed. Great for trunk, running board and picnic baskets. She will provide photos of some of her work if you would like. Diana Craft Waukesha, WI 262-547-8179 jcr...

My apologies for seemingly falling off the face of the earth. The project is in limbo due to circumstances unforseen. Primarily, I lost my desktop computer due to a logic board failure. An attempt was made by the service center whom I purchased a new computer through, but a majority of my files were...

20" tires/tubes for a roller chassis. Tread not important. Prefer from No. CA & SF Bay Area.
707-824-2882 vox w/vm Alan

28/29 Gas Tank. Non-functional preferred. No. CA area, but will consider shipment from other areas. 707-824-2882 vox w/vm Alan

Express bed skid strips, visor for 28/29 closed cab pick-up & hub caps for 28/29 wire wheels

707-824-2882 PST

Yes. If you would like, I will send you all the particulars. Just email me at the address in the post.