aa-fords.com

Skid strips.

I have a32bb dually flatbed, but should not matter. With a lot of searching I found a place that will cut the strips to your specs. and put the square holes where you want them. These look like the original skid strips. Contact Horkey's Wood and Parts Inc. ph.# 507-831-5625 Windom, MN. 56101 www.hor...

#14 wire 15 amp fuse. #12 wire 20 amp fuse.

I don't know how to post pictures or I'd draw you a diagram. If you know an aircraft mechanic or somebody in the military that worked on planes, they could show you how. You cut yourself a length of safety wire at least thee times (I like to go a little longer) the distance between the bolts. Put th...

Yes, those are used to make patch panels on aircraft from bullet holes etc. Been there done that. They are called Cleco fasteners.

I purchased a complete cable nos, for my 32bb which I think is the same from "Half ton fun" Call Bob at 732-928-9421.

Try Coker tire in Tenn.

My exhaust manifold started leaking about 2 hr.s after initial start up which was after a total rebuild. After the first half hour, I shut it off and let it cool down for a few hours. I retorqued every thing and then ran it some more. After about another 1 1/2 hrs. it started leaking. I waited until...

I have a 32bb which is almost the same. I was informed that the welting went only where the fenders bolted to the frame.

I also have a 32bb that I just finished a two year restoration, and would also like to install belts. I guess we would both like to know where to get them and where to mount them.

Doesn't look all that great to me. Seller is just trying to make it look really rare to the people that don't know any better. That's doing business on ebay.

I just purchased mine from Hornkeys and they are 1.5 inches wide.

Instead of going through all that, why don't you try changing the length of the pitman farm first. Should help.

I have a 32bb and don't have that. But according to that schematic I would remove that grease fitting, take it for a ride around the block and see if any gear oil leaked out the hole. That should answer the question.