Search found 724 matches

by 1crosscut
April 21st, 2018, 9:28 pm
Forum: AA Ford Discussion
Topic: Dormant project coming back to life!
Replies: 2
Views: 87

Re: Dormant project coming back to life!

Good to see that you are able to get back to your AA again. Keep us posted on the progress. Wish I had the answers you need on you other posts but I am an early 29 owner. Don't know the details on the latter cabs.
by 1crosscut
April 5th, 2018, 8:29 pm
Forum: AA Ford Discussion
Topic: Flatbed Board Finish Options.
Replies: 7
Views: 439

Re: Flatbed Board Finish Options.

Sorry about the delay in getting this picture posted.
DSC_0418 (2).JPG
DSC_0418 (2).JPG (256.62 KiB) Viewed 307 times
by 1crosscut
April 3rd, 2018, 2:08 pm
Forum: AA Ford Discussion
Topic: Flatbed Board Finish Options.
Replies: 7
Views: 439

Re: Flatbed Board Finish Options.

I did white oak exactly as you have done with your bed wood. After sanding I used a 50/50 mixture of boiled linseed oil and turpentine. Do not use any more than 50% linseed oil as it may remain sticky. You can go 60% turpentine if you like. After getting a couple of coats onto the wood and letting i...
by 1crosscut
March 25th, 2018, 2:49 pm
Forum: AA Buy and Sell
Topic: Bulk sale AA restoration parts and projects
Replies: 8
Views: 2017

Re: Bulk sale AA restoration parts and projects

Original poster has not been on this site since October 2017.
by 1crosscut
March 11th, 2018, 8:09 am
Forum: AA Ford Discussion
Topic: Speedo cable
Replies: 10
Views: 444

Re: Speedo cable

Measure the casing on yours and give Steve at Bert's a call Tuesday. (closed Mondays) 800 321-1931
by 1crosscut
March 10th, 2018, 10:46 am
Forum: AA Ford Discussion
Topic: Speedo cable
Replies: 10
Views: 444

Re: Speedo cable

If I remember correctly I purchased mine from Bert's in Colorado.
by 1crosscut
March 1st, 2018, 5:43 pm
Forum: AA Ford Discussion
Topic: Spring Start-Up - What to look for?
Replies: 16
Views: 906

Re: Spring Start-Up - What to look for?

Stakebed has a lot of very good suggestions. This takes a bit more work, time and expense but it would be a very good idea to drop the oil pan to clean it out and check and adjust the mains and rod bearings. Also opening up the valve chamber and cleaning it out would be good. Might as well check the...
by 1crosscut
February 25th, 2018, 5:22 pm
Forum: AA Buy and Sell
Topic: TT Express - Billings, MT - Craigslist
Replies: 1
Views: 333

Re: TT Express - Billings, MT - Craigslist

One of the nicer ones I've seen come up for sale in a while.
by 1crosscut
February 25th, 2018, 8:44 am
Forum: AA Ford Discussion
Topic: Best Books
Replies: 4
Views: 333

Re: Best Books

I don't recall as having seen any books that specifically address this on the truck cabs.
by 1crosscut
February 19th, 2018, 5:49 pm
Forum: AA Buy and Sell
Topic: "29 hood
Replies: 8
Views: 618

Re: "29 hood

Stakebed wrote:
February 7th, 2018, 8:54 pm
I have the perfect one but unfortunately Im in IL :(
I wouldn't think it would be bank busting to box up a hood and ship it. If you pull the panels apart it should go into a relatively small box.
by 1crosscut
February 18th, 2018, 7:03 pm
Forum: AA Ford Discussion
Topic: Truck progress photos
Replies: 12
Views: 686

Re: Truck progress photos

Jeff - that is really looking nice. I am not at all surprised though. Especially after seeing the pictures of what you did on your Stanley Steamer. Your a true craftsman.
by 1crosscut
February 16th, 2018, 12:33 pm
Forum: AA Ford Discussion
Topic: hello
Replies: 2
Views: 288

Re: hello

Hello and welcome Mr. Bill.
by 1crosscut
February 13th, 2018, 8:33 pm
Forum: AA Ford Discussion
Topic: Hello
Replies: 30
Views: 1457

Re: Hello

There is a seal on each hub on the inboard side of the wheel bearing. There is a chance that you could get them off without damage and re-use them but I would not. Go ahead and order new seals before you start the job. There is a hardened washer on the end of the axle that the nut tightens up agains...
by 1crosscut
February 9th, 2018, 2:20 pm
Forum: AA Ford Discussion
Topic: Looking for some advice on AA trucks
Replies: 22
Views: 1253

Re: Looking for some advice on AA trucks

Alan, Welcome to the forum. Sounds to me that you would be a good candidate to own an AA. When I found my AA in late 2010 I knew pretty much nothing about them but had always had an ability to love and restore old stuff. Jumped in with both feet and have learned a heck of a lot since that time. I'm ...
by 1crosscut
February 8th, 2018, 9:37 am
Forum: AA Ford Discussion
Topic: Canadian Timken differential
Replies: 16
Views: 1073

Re: Canadian Timken differential

Nice to see the inside of something like this. I posted some pictures of the differential in my 29 AA a few years ago. http://forums.aa-fords.com/viewtopic.php?f=1&t=3844&p=20582&hilit=worm+drive#p20582 Perhaps when you get yours all sorted out you could lay it out similar to what I did and we could...