Search found 2731 matches

by Neil Wilson
October 17th, 2019, 8:03 am
Forum: AA Ford Discussion
Topic: AA Truck Wheels
Replies: 12
Views: 377

Re: AA Truck Wheels

FYI - I shipped two 1931 wheels with lock rings to Henderson, TX (from Boulder, CO) in July. The boxed weight was 49.6 lbs each. USPS shipping was $72.11 each and I charged $10 each for boxing ($156 total shipping). Yea, expensive! But, cheaper than driving. I would not have sold these wheels withou...
by Neil Wilson
October 17th, 2019, 7:46 am
Forum: AA Ford Discussion
Topic: Tires
Replies: 5
Views: 236

Re: Tires

On trucks with dual rear wheels all 6 plus the spare should be 6:00 x 20. On trucks with single wheels the front should be 6:00 x 20 and 6:50 x 20 on the rear. The spare would be another 6:50. The idea is that with a flat on the rear with a loaded truck would need a 6:50; a flat on the front could ...
by Neil Wilson
October 15th, 2019, 8:11 pm
Forum: AA Ford Discussion
Topic: AA Truck Wheels
Replies: 12
Views: 377

Re: AA Truck Wheels

I have four restored six hole disk wheels with lock rings from a 29 AA that I would sell for $100.00 each. I was planning on using them for my restoration until I came up with four spoke wheels.They have been sandblasted and painted with POR 15 then top coated with satin black POR 15 top coat. The ...
by Neil Wilson
October 13th, 2019, 7:34 am
Forum: AA Buy and Sell
Topic: AA Rear Fenders – 1928-6/30
Replies: 5
Views: 660

Re: AA Rear Fenders – 1928-6/30

See photos at https://app.box.com/s/hxxfbscjamekkqn1yu8ptb7gwz8yxaco - $2200 + shipping to your zip code.
by Neil Wilson
October 13th, 2019, 7:32 am
Forum: AA Buy and Sell
Topic: Wheel, Radiator Shells, Door - For Sale
Replies: 10
Views: 1050

Re: Wheel, Radiator Shells, Door - For Sale

Wheel, Radiator Shells, and Door – still for sale – see above original ad links to photos
by Neil Wilson
October 11th, 2019, 7:38 am
Forum: AA Ford Discussion
Topic: AA Truck Wheels
Replies: 12
Views: 377

Re: AA Truck Wheels

They were AA-1015-C d1, and d4 Thanks vonheine, I had no idea that the price for these 1930/1931 AA wheels have gotten that expensive. Did the wheels include the split locking ring? If yes, were the rings good enough for cadmium plating (i.e. no pitting). Anyone know the asking price for the 1928 s...
by Neil Wilson
October 10th, 2019, 7:53 pm
Forum: AA Ford Discussion
Topic: AA Truck Wheels
Replies: 12
Views: 377

Re: AA Truck Wheels

Which kind of wheels did you find? There were several designs as shown at https://aafords.com/aa-chassis/aa-1000-wheels/#w
by Neil Wilson
October 2nd, 2019, 1:45 pm
Forum: AA Buy and Sell
Topic: AA Rear Fenders – 1928-6/30
Replies: 5
Views: 660

Re: AA Rear Fenders – 1928-6/30

xxx
by Neil Wilson
October 2nd, 2019, 1:40 pm
Forum: AA Buy and Sell
Topic: AA Rear Fender - For 1930 89-A
Replies: 8
Views: 785

Re: AA Rear Fender - For 1930 89-A

$850.00+shipping - For additional photos visit https://sell.aafords.com/aa-parts-for-sale/#aa16000
by Neil Wilson
September 22nd, 2019, 9:10 am
Forum: AA Ford Discussion
Topic: Wheels and tires
Replies: 1
Views: 831

Re: Wheels and tires

Will 31 raised center type wheels work on 30 singles front and or rear? Also what size tires do you run. Mine has a decent pair 650-20 Michelins on front and rotted 600-20s on rear. (I tagged the photo wrong, that’s a rear wheel in picture) Actually, the 1931 AA wheel has the same off-set as the 19...
by Neil Wilson
September 22nd, 2019, 6:05 am
Forum: AA Ford Discussion
Topic: Two Bulb Headlights
Replies: 9
Views: 1079

Re: Two Bulb Headlights

My ‘30 has two bulb headlights. Does the reflector go in with second bulb above or below center bulb. Is second lamp a park light? Can it be wired as a turn signal? The parking light must be to the top (Snyder's link shows the reflector up-side-down). The parking lights could be used for turn signa...
by Neil Wilson
September 19th, 2019, 2:26 pm
Forum: AA Ford Discussion
Topic: Steak bed Rear Window See Through Grille ?
Replies: 14
Views: 1219

Re: Steak bed Rear Window See Through Grille ?

I saw this metal grille piece that sections in to the steak bed wood that blocks the rear window. Does anyone knows who carries this for sale? Brian Brian, That part is the stake rack view panel use for the 188-A stake racks. It is made by a club member Anders Jansson in Sweden and I also sell it f...
by Neil Wilson
September 18th, 2019, 7:22 pm
Forum: AA Ford Discussion
Topic: Headlights and Horn In-op
Replies: 21
Views: 1880

Re: Headlights and Horn In-op

I could be wrong but the deck body shown looks like one from an earlier truck (Ford Scrypt) I see the Ford Script and it is different than mine. I have a '28 and it says " Ford Truck" on the rear. Also different steak pockets. So, not a '28??? FYI - azguy39's platform has Ford on the rear which wou...
by Neil Wilson
September 15th, 2019, 5:15 am
Forum: AA Buy and Sell
Topic: AA Rear Fenders – 1928-6/30
Replies: 5
Views: 660

Re: AA Rear Fenders – 1928-6/30

xxx