Search found 2598 matches

by Neil Wilson
November 15th, 2018, 8:52 am
Forum: AA Ford Discussion
Topic: Chronology of the 3 and 4 speed and under drive.
Replies: 2
Views: 56

Re: Chronology of the 3 and 4 speed and under drive.

I inserted my comments in Dave's comments: The 28's and early 29's came with the three speed transmission the same as the cars. The dual high transmission was an option for the trucks with the high speed worm drive rear ends. NOTE - A Ford option for any AA with a 3-speed. If used behind a low speed...
by Neil Wilson
November 7th, 2018, 10:34 am
Forum: AA Buy and Sell
Topic: WTB warford shift lever
Replies: 6
Views: 202

Re: WTB warford shift lever

birdacre wrote:
November 5th, 2018, 2:15 pm
no threads. just a sharp square about 1/2 inch square, must have been molded in a bakelite type of material. i could cut and thread and put on a knob. i was not sure how common these levers were.
FYI - The attached shows the lever and ball.
by Neil Wilson
October 28th, 2018, 7:41 pm
Forum: AA Buy and Sell
Topic: '29 Hi/Low trans linkage.
Replies: 6
Views: 265

Re: '29 Hi/Low trans linkage.

First off, thanks for posting. What I have looks a little different. Concentric rings not parallel lines. The distance between the two eyes is approx. 15".shift5.jpgshift4.jpgshift1.jpg So, you have a miss-match of parts - design 3 dual high and design 1 pedal. Ford didn't make a rod for this setup...
by Neil Wilson
October 27th, 2018, 7:34 pm
Forum: AA Buy and Sell
Topic: '29 Hi/Low trans linkage.
Replies: 6
Views: 265

Re: '29 Hi/Low trans linkage.

My profile pic is my truck. I was able to finally acquire the rocker pedal for the hi-low trans and rough it in. Now I just need the linkage. I can fab something, but I I'd rather have original. Any parts out there? I can hazard some pics of my trans, but they'll be from under the truck. 732-591-88...
by Neil Wilson
October 26th, 2018, 8:37 am
Forum: AA Ford Discussion
Topic: Maple floorboards
Replies: 16
Views: 558

Re: Maple floorboards

ModelAkid wrote:
October 25th, 2018, 10:02 pm
Is anyone making & selling the original style maple planks that made up the original floorboards from 1928 to around mid-'29?
Floorboards for what????? Cab, cargo body (which body) ???????????
by Neil Wilson
October 23rd, 2018, 10:14 am
Forum: AA Buy and Sell
Topic: Wheel stud and wheel nut
Replies: 22
Views: 927

Re: Wheel stud and wheel nut

Kaboom wrote:
October 22nd, 2018, 10:27 pm
Mine is June of 1929 according to engine number. 5 hand holes on rims.
Your wheel design does not agree with the engine id date (most AA's don't have the original engine).

Look at http://aafords.com/aa-chassis/aa-1000-wheels/ - your wheels are for 1930 to 1931 AA's.
by Neil Wilson
October 10th, 2018, 6:39 am
Forum: AA Ford Discussion
Topic: Truck Platform Body Bed Questions
Replies: 4
Views: 482

Re: Truck Platform Body Bed Questions

Hi Neil. That is really great information you put together. Very impressive and thorough. So you are correct I have a January 1931 truck and the 88A platform frame is from a 1929 AA. I have a question to clarify on the size of the wood sills from what is in the articles. The text states, "Floor Sid...
by Neil Wilson
October 5th, 2018, 2:49 pm
Forum: AA Ford Discussion
Topic: How does this come apart?
Replies: 5
Views: 615

Re: How does this come apart?

I guess the coupler has to come off the shaft, but does it have a pin through it, or is it just stuck on? The flange/housing slide back and forth so it is ready to go. It was getting dark when I got it to this point so I didn't have a lot of time to examine it. Once the u-joint is removed, then the...
by Neil Wilson
October 1st, 2018, 6:51 am
Forum: AA Ford Discussion
Topic: Hood and side panels for AA vs pickup
Replies: 2
Views: 306

Re: Hood and side panels for AA vs pickup

I need to buy a hood for my '31 AA. Because the radiator shell for an AA is longer from front to back than the shell for a '31 pickup, do I still buy a standard pickup hood to fit between the cab/fuel tank/cowling and the AA radiator shell? For AA's, the hood used the A chassis hood. This included ...
by Neil Wilson
September 24th, 2018, 8:57 pm
Forum: AA Ford Discussion
Topic: Truck Platform Body Bed Questions
Replies: 4
Views: 482

Re: Truck Platform Body Bed Questions

Hi, I have a 1931 AA and I am working on the platform body style bed. I could use a little guidance please. 1. What are the dimensions of the wood sills that go on the frame? The wood on the existing looks to be not original. I came across this number, but my frame from the cab back is only about 8...
by Neil Wilson
September 12th, 2018, 7:17 am
Forum: AA Ford Discussion
Topic: Worm Drive - Worm Thrust Bearing Lubrication?
Replies: 1
Views: 356

Worm Drive - Worm Thrust Bearing Lubrication?

For the worm drive axle, there was a rear axle housing cap (AA-4190) which had a fitting to allow lubrication of the worm thrust bearing (AA-4696). The cap's initial design had a pipe plug fitting as shown in the attached photo. It was the same as TT-1004. It was used to lubricate the worm thrust be...
by Neil Wilson
September 9th, 2018, 8:34 am
Forum: AA Ford Discussion
Topic: 28/29 Warford shift pattern?
Replies: 2
Views: 437

Re: 28/29 Warford shift pattern?

s147881 wrote:
September 8th, 2018, 2:23 pm
can anyone tell me the shift pattern on my 28/29 Warford? It is a backwards h pattern and seems to be opposite of the model T Warfords.
I found this - it might help.
by Neil Wilson
September 9th, 2018, 8:18 am
Forum: AA Buy and Sell
Topic: 1931 Standrive on Ebay
Replies: 1
Views: 359

1931 Standrive on Ebay

by Neil Wilson
August 30th, 2018, 2:54 pm
Forum: AA Ford Discussion
Topic: Rear window glass
Replies: 2
Views: 418

Re: Rear window glass

I'm in need of the rear window glass measurements for the '29 AA if anyone has them? The photo is from the May 1928 Service Bulletin. Note - I believe this is correct for the 82-A closed cab with high rear window. I suggest you make a pattern out of plywood and verify it works for the cab with the ...