Search found 22 matches

by cokefirst
May 14th, 2019, 2:50 pm
Forum: AA Ford Discussion
Topic: Finally acquired my '31 AA!
Replies: 9
Views: 888

Re: Finally acquired my '31 AA!

I removed my cab for painting and found my VIN number on the frame rail exactly where it is listed above. The problem is that my truck was a rusty wreck when I bought it. I had it restored and it was titled under the engine number that was not even a Ford number. After 30+ years, the cab needed pain...
by cokefirst
May 14th, 2019, 2:28 pm
Forum: AA Ford Discussion
Topic: 31 AA speedometer driven gear
Replies: 3
Views: 153

Re: 31 AA speedometer driven gear

Snyder's Antique Auto Parts has them new. The part number is AA-17271-H and the cost is $84.00. Expensive till you look at what it cost to get one made. I did that about 30 years ago and at that time it cost me $125 to have it machined.
by cokefirst
May 14th, 2019, 2:13 pm
Forum: AA Buy and Sell
Topic: Help, 4 speed transmission parts needed
Replies: 1
Views: 111

Re: Help, 4 speed transmission parts needed

Thank you to all, I have located the parts I need. Dan
by cokefirst
May 13th, 2019, 3:00 pm
Forum: AA Ford Discussion
Topic: Best Tire size for '31 AA LWB duals
Replies: 4
Views: 412

Re: Best Tire size for '31 AA LWB duals

I bought the 650 x 20s for my truck and I am regretting it. I had to put a spacer on the Budd nuts in the rear to give me enough distance to keep the rear tires from touching. I have no problem with the brake rods, but I wish I had purchased the 600 x 20 tires. I can fix this when I replace the tire...
by cokefirst
May 13th, 2019, 2:15 pm
Forum: AA Ford Discussion
Topic: lifting cab off of frame
Replies: 11
Views: 454

Re: lifting cab off of frame

I did this to paint the cab. Unless your cab was kept in dry conditions, it is likely that the mirror trick will not work. My VIN was so faint it took several attempts by a CHP VIN expert to determine the number. Once is was decided. I painted the frame black with spray paint but left the part with ...
by cokefirst
May 13th, 2019, 2:04 pm
Forum: AA Buy and Sell
Topic: Help, 4 speed transmission parts needed
Replies: 1
Views: 111

Help, 4 speed transmission parts needed

I have a 1931 AA truck with the 4 speed. I removed the shift lever to have it plated and I have misplaced two parts. I am unable to find them and need to purchase replacements. The parts I need are the rounded part and spring that is held in place by the threaded cap on the top of the transmission. ...
by cokefirst
May 28th, 2016, 9:20 pm
Forum: AA Ford Discussion
Topic: advice on removing running boards and aprons
Replies: 3
Views: 1627

Re: advice on removing running boards and aprons

Hi Neil, Sorry for the incomplete information. This was originally a dump truck, but I got rid of the dump body and put on the stake bed. It has the left sidemount spare. The fenders have been removed and I have a fabricator making the well for the right fender. The frame is stamped for the right si...
by cokefirst
May 28th, 2016, 9:51 am
Forum: AA Ford Discussion
Topic: advice on removing running boards and aprons
Replies: 3
Views: 1627

advice on removing running boards and aprons

I have a 31 AA stake body truck. It was restored 30 or so years ago. I am adding a side mount spare on the right side and the fabricator needs the apron and running boards off the truck to put in the holes. (plus I want to repaint all the black before reassembly. I have looked under and inside the c...
by cokefirst
May 28th, 2016, 9:40 am
Forum: AA Buy and Sell
Topic: AA Transmission Free
Replies: 2
Views: 2427

Re: AA Transmission Free

Is this a 4 speed 30-31 or earlier?
by cokefirst
December 10th, 2015, 4:25 pm
Forum: AA Ford Discussion
Topic: Indented Door for side mount
Replies: 8
Views: 2124

Re: Indented Door for side mount

Thanks guys for all the great information. My door would hit the tire and to keep that from happening, the restorer added some washers to the door stop mechanism to keep the door from opening so much. I do not, nor do I intend to show my truck, but would like the indent so the door could open to it'...
by cokefirst
December 8th, 2015, 9:33 pm
Forum: AA Ford Discussion
Topic: Indented Door for side mount
Replies: 8
Views: 2124

Re: Indented Door for side mount

Thank you, my truck was originally a dump with the sidemount, but the door did not have the indent. I assume someone replaced the door at some time. When I got it, the truck was a basket case, so who knows what happened. I would like to find one to take measurements so I can have one fabricated for ...
by cokefirst
December 6th, 2015, 9:44 pm
Forum: AA Ford Discussion
Topic: Indented Door for side mount
Replies: 8
Views: 2124

Indented Door for side mount

Where there different shapes of door indents? I have seen photos of two distinctly different indents. One photo shows the indent with a the vertical cut perfectly straight an parallel with the indent "C shaped. The other photo looked more like a dent with the sides rounded. Can anyone explain the di...
by cokefirst
November 4th, 2015, 1:22 pm
Forum: AA Buy and Sell
Topic: WANTED 31 Disc Wheel and ring
Replies: 5
Views: 3314

WANTED 31 Disc Wheel and ring

Located in San Bernardino, CA. I need 1 1931 5 slot disc wheel and ring for my truck. Thanks! 909-882-2240 or 909-633-8778
by cokefirst
November 4th, 2015, 1:17 pm
Forum: AA Buy and Sell
Topic: 1931 AA side mount wanted
Replies: 8
Views: 3234

Re: 1931 AA side mount wanted

Thanks Bob, I got the parts from you and I think it is all going to come together. Now I just need to find an additional 5 hole disc wheel for this and then to the body shop for the fabrication of the fender well.
by cokefirst
October 8th, 2015, 8:47 pm
Forum: AA Buy and Sell
Topic: Wanted, metal floor plate that seals steering and pedals
Replies: 2
Views: 1294

Wanted, metal floor plate that seals steering and pedals

I am looking for the two piece metal plate that is used with a felt seal to seal the brake and clutch pedals and steering column on the floorboard. The ones for the passenger car and light trucks are not large enough. I am located in San Bernardino 909-882-2240 or 909-633-8778