I'm working on a 34 ton and a half and the front spring shackle is broke, are the ones for the trucks bugger than the pickups or cars, the pin diameter is .556.
Thanks Aaron
Search found 26 matches
- September 12th, 2023, 8:19 pm
- Forum: AA Ford Discussion
- Topic: spring shackle
- Replies: 2
- Views: 43966
- July 4th, 2023, 7:30 am
- Forum: AA Ford Discussion
- Topic: Brake shoe type
- Replies: 2
- Views: 37465
Re: Brake shoe type
Thanks Bob, Ill check some more.
- July 3rd, 2023, 4:46 pm
- Forum: AA Ford Discussion
- Topic: Brake shoe type
- Replies: 2
- Views: 37465
Brake shoe type
I'm working on a 34 V-8 1 1/2 ton, it doesn't like to stop , I've had drums off, adjusted the shoes, checked all the linkages, it even has a vacume boost on it, it does have woven lining and the drums are steel, at least from sticking a magnet thru the wheel, the linings look to be good, would bonde...
- February 24th, 2019, 8:27 pm
- Forum: AA Buy and Sell
- Topic: Bed bolts
- Replies: 11
- Views: 9322
Re: Bed bolts
Thanks Neil, I saw those on the other board, is there any chance of a part number.
- February 21st, 2019, 9:45 am
- Forum: AA Buy and Sell
- Topic: Bed bolts
- Replies: 11
- Views: 9322
Re: Bed bolts
This is what is on this truck there are about 4 or 5 of them, what you have there I don't believe will work as these are in the bed strips and there is no washer with two screws.
- February 20th, 2019, 7:58 pm
- Forum: AA Buy and Sell
- Topic: Bed bolts
- Replies: 11
- Views: 9322
Re: Bed bolts
Thanks Rusty, I'll get Pic and measure mine do you have pics of the ones you've made.
- February 20th, 2019, 8:03 am
- Forum: AA Buy and Sell
- Topic: Bed bolts
- Replies: 11
- Views: 9322
Re: Bed bolts
Neil, its on a 32 BB so i would guess it to be a late body, wouldn't the hold down bolts be the same, I have acouple of them but someone put other stuff in place of the missing, the orginals have the large carriage bolt type head and are 7/16.
- February 19th, 2019, 8:22 am
- Forum: AA Buy and Sell
- Topic: Bed bolts
- Replies: 11
- Views: 9322
Bed bolts
I'm looking for bed hold down bolts for an express bed that go thru the bed to the frame, no body is repoping them, does anyone have extras.
Thanks
Aaron
Thanks
Aaron
- July 19th, 2018, 8:41 pm
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
Bob,I can't get the pdf of the gear set from job lot to post for some reason I'll get it figured out tomorrow.
I did a search for the gear ratio chart you told me about but haven't found that either.
I did a search for the gear ratio chart you told me about but haven't found that either.
- July 16th, 2018, 8:36 pm
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
Bob, can you e-mail me a ph #, I think the set up for the 34/39 might work,why couldn't i just use a splined yoke instead of putting a taper to the pinion.
Thank you
Thank you
- July 16th, 2018, 6:53 am
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
Thats the one I'm working on,not mine I just fix the problems.
- July 15th, 2018, 8:20 pm
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
These have a 3 spd down drive trans,no way to put an aux box or two spd rear, orginal engine was a 6 cyl Hercules someone changed it to a 264 V-8 Buick, no low end torque and not enough power to pull the bus now in 3rd gear,plus with the tire and wheel change its geared really fast, its not going to...
- July 15th, 2018, 4:24 pm
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
What gear ratios were available for those rears, this one is set up with a 5:14 I want it slower, orginally these came with 7:00 18 tires and wheels, someone put 8:25:20's on and that seems to have geared it way too fast.
Here is what the numbers are for the coach ratio's none of which are available.
Here is what the numbers are for the coach ratio's none of which are available.
- July 15th, 2018, 4:12 pm
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
Thank you.
Yes that is the type,without the center door, the one I'm working on is the 23 R.
The housings look the same but my hubs look like the 34's, this axle is set up for air brakes but thats just a backing plate to spider change,not a big deal.
Yes that is the type,without the center door, the one I'm working on is the 23 R.
The housings look the same but my hubs look like the 34's, this axle is set up for air brakes but thats just a backing plate to spider change,not a big deal.
- July 14th, 2018, 8:30 pm
- Forum: AA Ford Discussion
- Topic: Ring and pinion gear set question
- Replies: 14
- Views: 8949
Re: Ring and pinion gear set question
No Chassis,monococ construction, rear end is off set big time, 13 inches of tube on drivers side,passenger side is 13 inches longer,pinion points straight up and has a double ujoint and then a slip in the down drive transmission, my pinion is tapered, housing and hubs are the same as mid 30's ford t...