Search found 56 matches

by pinesdune
April 19th, 2018, 1:34 pm
Forum: AA Ford Discussion
Topic: Newbie AA
Replies: 40
Views: 40369

Re: Newbie AA

Got her going today folks, thanks for the help so far [emoji106]

https://youtu.be/NFBZtSisr8s


Rust and glory
by pinesdune
April 13th, 2018, 2:57 pm
Forum: AA Ford Discussion
Topic: Assembly order?
Replies: 4
Views: 3937

Re: Assembly order?

Thanks guys, I just finished up as Neil suggested, I have the stock 3 speed transmission and three speed warford so I dropped the engine in first then there was just enough room as Neil said to wiggle the warford up and in, thanks guys, I really didn't want to get something in then have to tear it a...
by pinesdune
April 12th, 2018, 8:33 pm
Forum: AA Ford Discussion
Topic: Assembly order?
Replies: 4
Views: 3937

Assembly order?

Hi folks, just getting ready to bolt stuff back together on my truck and am trying to figure out what goes on first, does the three speed warford bolt up to the frame then engine/transmission goes in, or can I drop in the engine/transmission then attach the warford after, I'm just not sure if there'...
by pinesdune
April 7th, 2018, 5:50 am
Forum: AA Ford Discussion
Topic: Spicer Axel Components
Replies: 4
Views: 3865

Re: Spicer Axel Components

Hi Bob, I've decided to cheat this, I picked up a couple cv boots and am going to use them over the slip joint and remove the springs and smaller slip cover with hopes of finding a good set somewhere in the future. With the driveshaft being bolted it's only a few minutes and I can remove it and repl...
by pinesdune
April 3rd, 2018, 5:13 pm
Forum: AA Ford Discussion
Topic: Spicer Axel Components
Replies: 4
Views: 3865

Re: Spicer Axel Components

Best I can tell from the parts book the big bell is a Inner Casing Assembly AAC 100008 R and the other part is an Outer Casing Assembly (slip joint) AAC 100009 AR. There is also a Casing Spring (slip joint) AAC 100012 AR. Thanks for the part numbers, I imagine these will be a "make my own"...
by pinesdune
April 2nd, 2018, 6:18 pm
Forum: AA Ford Discussion
Topic: Spicer Axel Components
Replies: 4
Views: 3865

Spicer Axel Components

Anyone know who repops / or how to make these, off my Canadian AA, looking for the bells and covers (if that's the correct terms) https://uploads.tapatalk-cdn.com/20180403/5d6887823395cb71da23b51a7392cb0f.jpg https://uploads.tapatalk-cdn.com/20180403/5822facb2d1daf198ea396bf555ad3ab.jpg All Spicer c...
by pinesdune
March 24th, 2018, 12:45 pm
Forum: AA Buy and Sell
Topic: Canadian Timken Diff and Brake parts
Replies: 0
Views: 12152

Canadian Timken Diff and Brake parts

I have a couple Timken diffs in pieces, if you're looking for a part, just pm and ask or make an offer on the lot. One ring gear and pinion is destroyed, the second is useable but wore, no salvageable rims but I do have enough ash blanks to make up a wooden wheel hub and know of a good wheel wright....
by pinesdune
March 24th, 2018, 9:24 am
Forum: AA Ford Discussion
Topic: Canadian Timken differential
Replies: 18
Views: 16891

Re: Canadian Timken differential

Last set of pics on the diff, A pic of the brakes, two pads for the ebrake, two for regular braking https://uploads.tapatalk-cdn.com/20180324/68cd2b47dbfbb012e26522e4b659f013.jpg https://uploads.tapatalk-cdn.com/20180324/02fd57aa4e5de5f00d8e36af4f768c80.jpg https://uploads.tapatalk-cdn.com/20180324/...
by pinesdune
March 22nd, 2018, 5:24 pm
Forum: AA Ford Discussion
Topic: Canadian Timken differential
Replies: 18
Views: 16891

Canadian Timken differential

More pics for parts identification and the bearing list https://uploads.tapatalk-cdn.com/20180322/7c4270691fb93dad0b09d10c197ca404.jpg https://uploads.tapatalk-cdn.com/20180322/392fb47ca3ef0b00b4a7796f18c0d0c3.jpg The brass plate and adjusting bolt it for ring gear side loading Front pinion bearing ...
by pinesdune
March 21st, 2018, 2:32 pm
Forum: AA Ford Discussion
Topic: Canadian Timken differential
Replies: 18
Views: 16891

Canadian Timken differential

Just more assembly pics, Pinion assembly, notice the lip on the input shaft side, it receives a cork seal that seals the cover with the pinion shaft seal to the housing. https://uploads.tapatalk-cdn.com/20180321/d999fd62e13d6914e582b325763cceff.jpg https://uploads.tapatalk-cdn.com/20180321/f65f1a340...
by pinesdune
March 21st, 2018, 6:05 am
Forum: AA Ford Discussion
Topic: Canadian Timken differential
Replies: 18
Views: 16891

Re: Canadian Timken differential

Truck update, I removed the rear suspension pivots and took them to a welding shop and had them and the bolts built up, as well as new bushings installed. Got the rivets I needed and finally managed to find time to get it all back together https://uploads.tapatalk-cdn.com/20180321/66d7db8daa2d88615c...
by pinesdune
February 23rd, 2018, 10:03 am
Forum: AA Ford Discussion
Topic: Front spring clip question
Replies: 6
Views: 4266

Re: Front spring clip question

Quick question about the front spring clips, I don’t have any on my truck and am going to make a couple. FYI - Clip or Clamp???? Attached photo shows what the spring clips are. I am guessing you are referring to spring clamps. I’m after the light duty clips that stop the spring from rotating, I’ve ...
by pinesdune
February 23rd, 2018, 4:38 am
Forum: AA Ford Discussion
Topic: Front spring clip question
Replies: 6
Views: 4266

Front spring clip question

I’m rebuilding the front end on my AA while I wait for the last couple bits to come for the diff. Quick question about the front spring clips, I don’t have any on my truck and am going to make a couple. What width and thickness of steel are they, and how “tight” are they to the front axel, I’m guess...
by pinesdune
February 22nd, 2018, 3:55 pm
Forum: AA Ford Discussion
Topic: Looking for Information
Replies: 8
Views: 5548

Re: Looking for Information

There was a truck like that listed in a sale last fall in southern Manitoba, is that the truck?


Rust and glory
by pinesdune
February 12th, 2018, 6:15 am
Forum: AA Ford Discussion
Topic: Looking for some advice on AA trucks
Replies: 32
Views: 19150

Re: Looking for some advice on AA trucks

I haven’t played /drove an AA.... yet , but the 40’s 50’s Early 60’s trucks over 1 ton all had similar road speeds, more or less maxed out at 55mph. Only nice thing with the newer trucks is I believe you can swap differentials and transmissions to achieve more comfortable highway speeds, but IMO the...