Search found 1132 matches

by Stakebed
April 20th, 2018, 7:59 am
Forum: AA Ford Discussion
Topic: Putting Wire Spokes on the '28/'29
Replies: 19
Views: 1867

Re: Putting Wire Spokes on the '28/'29

perfect thank you!
by Stakebed
April 19th, 2018, 9:30 am
Forum: AA Ford Discussion
Topic: Putting Wire Spokes on the '28/'29
Replies: 19
Views: 1867

Re: Putting Wire Spokes on the '28/'29

Can someone with wire spoke wheels measure and post the diameter opening in the wheel for the hubcap? Curious as to what I can find to snap in there.
by Stakebed
April 18th, 2018, 11:01 am
Forum: AA Buy and Sell
Topic: AA spring perches WTB
Replies: 4
Views: 128

Re: AA spring perches WTB

Well what i did was braze the bushing to the worn out perch, ream round again and it will be good for many many years as long as you keep grease in it like its designed. As they were they were worn and junk as the shackle wore thru to the casting - might as well prolong them another lifetime.
by Stakebed
April 13th, 2018, 7:01 am
Forum: AA Ford Discussion
Topic: Assembly order?
Replies: 4
Views: 220

Re: Assembly order?

My guess is when starting with a bare frame is warford or dual high, attach the U joint for the rear axle and attach that next so you can have a stable platform - also a way to move the driveshaft to align the trans to warford. Then engine trans combo last. Make sure you got all the u joint gaskets ...
by Stakebed
April 9th, 2018, 5:54 pm
Forum: AA Ford Discussion
Topic: Running board support bracket color
Replies: 2
Views: 164

Re: Running board support bracket color

black as with everything else regarding the rolling chassis (besides some wheel parts)

one thing ive wondered: was the dual high engine green or black? what about the clamshells?
by Stakebed
April 9th, 2018, 5:10 am
Forum: AA Ford Discussion
Topic: Top wood replacement
Replies: 7
Views: 319

Re: Top wood replacement

i think i was told it was dum dum. kind of a crude RTV/weather sealer of its time. Im betting there is a more modern better sealer people use but dont know what it is.
by Stakebed
April 6th, 2018, 10:41 am
Forum: AA Buy and Sell
Topic: Wanted - 28/29 closed cab subrails etc
Replies: 7
Views: 306

Re: Wanted - 28/29 closed cab subrails etc

there was on ebay exactly what you wanted for like $150 late last year. I just looked and couldn't find it... Might just search "model A" on ebay every now and then and hope it reappears.
by Stakebed
March 29th, 2018, 12:47 pm
Forum: AA Ford Discussion
Topic: Axles too long?
Replies: 7
Views: 469

Re: Axles too long?

I will try and install some hub caps tonight. I was worried the rear end went together wrong. FYI - If you assembled the rear axle from other axles, then the worm drive without emergency brakes had longer axles than the worm drive with emergency brakes. This is true BUT if he used later 29 axles on...
by Stakebed
March 22nd, 2018, 1:56 pm
Forum: AA Ford Discussion
Topic: Canadian Timken differential
Replies: 16
Views: 1073

Re: Canadian Timken differential

Awesome job - thanks for the pics! Keep the updates commin.
by Stakebed
March 14th, 2018, 7:29 pm
Forum: AA Ford Discussion
Topic: Rod knockin'
Replies: 5
Views: 411

Re: Rod knockin'

And your SURE its from inside the engine? Could be flywheel/clutch related. Does it do it in neutral when your stopped and revving the engine? Clutch depressed and revving VS released?

Is it only under a load? What about when in reverse? driveshaft can transmit sounds to many places...
by Stakebed
March 1st, 2018, 2:04 pm
Forum: AA Ford Discussion
Topic: Spring Start-Up - What to look for?
Replies: 16
Views: 906

Re: Spring Start-Up - What to look for?

Since yours in an AA the front half is pretty much the same as an A but the rear springs are a different animal. go over them closely and hit all the grease zerks. also dont forget the throwout bearing under its excess plate also dont forget a drop of oil on the starter, generator, accel linkage, cr...
by Stakebed
February 28th, 2018, 9:25 am
Forum: AA Ford Discussion
Topic: Hubcap
Replies: 1
Views: 285

Re: Hubcap

the 28 cap? - maybe. the 29 cone ones? no not sure what their smoking... especially the pair of dented rubbed ones for $149...Ive found better ones all day long for $1 - $5 at swap meets... Those dents are a bear to get out due to the thick steel...
by Stakebed
February 28th, 2018, 6:54 am
Forum: AA Buy and Sell
Topic: 1930 Front Axle
Replies: 3
Views: 321

Re: 1930 Front Axle

Where are you located? Those are big heavy parts to ship.
by Stakebed
February 26th, 2018, 11:42 am
Forum: AA Ford Discussion
Topic: Looking for some advice on AA trucks
Replies: 22
Views: 1253

Re: Looking for some advice on AA trucks

One question I have is on the inside of the back cover, there's an Express bed with high sides on it. Any of those survive? I actually like the shorter Express bed, but was curious after seeing that. Alan That is the 242-A Heavy Duty Express - few survivors - more at http://aafords.com/open-bodies/...