Search found 54 matches

by Rumbler
March 18th, 2019, 1:04 pm
Forum: AA Buy and Sell
Topic: WTB Early AA spindle bolt locking pins
Replies: 2
Views: 201

Re: WTB Early AA spindle bolt locking pins

Thanks, Bill. Replied via email.

Brian
by Rumbler
March 16th, 2019, 10:24 am
Forum: AA Buy and Sell
Topic: WTB Early AA spindle bolt locking pins
Replies: 2
Views: 201

WTB Early AA spindle bolt locking pins

I'm looking for a pair of 1928 AA spindle bolt locking pins. Please see the attached photo. These would be the early version where the lock pin is one-piece with the head, which serves as the spindle stop. The head is a little longer than the "A" version, as shown in the picture. The pin is fastened...
by Rumbler
March 9th, 2019, 2:43 pm
Forum: AA Ford Discussion
Topic: Worm Drive Gear Ratio
Replies: 4
Views: 325

Re: Worm Drive Gear Ratio

Bob F- If there is no stamping it is most likely a high speed because that was the initial offering. The stamping came when they started offering the low speed option, to identify which was which. See the following thread on how to confirm high or low speed rear differential. http://forums.aa-fords....
by Rumbler
March 5th, 2019, 1:18 am
Forum: AA Ford Discussion
Topic: Spacers for rear axle bumper?
Replies: 4
Views: 412

Re: Spacers for rear axle bumper?

Thanks, everyone :D :D
by Rumbler
March 3rd, 2019, 12:14 pm
Forum: AA Buy and Sell
Topic: Found: Late 28 AA *RIGHT* Fender
Replies: 6
Views: 412

Re: WTB: Late 28 AA Rear Fenders

I have a used but good shape LH rear fender. $650 plus shipping.

BTW, your brother knows there are easier ways to do a chassis inspection, right? :lol:

Brian
by Rumbler
February 27th, 2019, 10:35 am
Forum: AA Ford Discussion
Topic: Early (2 piece) brake cross shafts won't come out
Replies: 10
Views: 462

Re: Early (2 piece) brake cross shafts won't come out

Thanks, Neil.
Looks similar, first design was pinned-on levers (my truck) and the second design had integral forged levers.

Brian
by Rumbler
February 26th, 2019, 4:09 pm
Forum: AA Ford Discussion
Topic: dual high paint color?
Replies: 9
Views: 982

Re: dual high paint color?

Well, mine is now a very fresh coat of engine green. As you all know, there were 3 dual high designs. Mine is design 2, with the hexagonal case, which was only in production from March '28 to mid '28 according to RGJS. Designs 1 and 3 seem very similar, with the round case. Maybe design 2 was made b...
by Rumbler
February 26th, 2019, 3:46 pm
Forum: AA Ford Discussion
Topic: Early (2 piece) brake cross shafts won't come out
Replies: 10
Views: 462

Re: Early (2 piece) brake cross shafts won't come out

Thanks, Bill- You've provided a great clue! According to the RGJS (Area 7-4, Revised 2011): 1) "The first 2-piece shaft (A-2485-A) had a pinned lever (eye on top, clevis on bottom). It was limited to the first 20,000 cars and ended in February 1928." 2) "The second shaft (A-2485-B) had a lever which...
by Rumbler
February 25th, 2019, 9:17 pm
Forum: AA Ford Discussion
Topic: Early (2 piece) brake cross shafts won't come out
Replies: 10
Views: 462

Re: Early (2 piece) brake cross shafts won't come out

Thanks, KVO. I ground the peened head off and tried punching the rivet out without success. Will probably have to drill them out, but hard to hold the shaft fixed when in the frame. I know I'm whining, but it should be easier! :cry:
by Rumbler
February 25th, 2019, 4:37 pm
Forum: AA Ford Discussion
Topic: Early (2 piece) brake cross shafts won't come out
Replies: 10
Views: 462

Early (2 piece) brake cross shafts won't come out

OK, last parts to come off my frame are the left and right brake cross shafts on my early 28 truck. However, the inside lever at the end of the shaft won't fit through the slot in the frame (that the shaft goes through). The slot is about 1-1/16" and the shaft end of the lever is about 1-1/4" diamet...
by Rumbler
February 22nd, 2019, 12:08 pm
Forum: AA Ford Discussion
Topic: dual high paint color?
Replies: 9
Views: 982

Re: dual high paint color?

I have just disassembled my dual high (Design 2) and found the rear hexagonal case was painted Ford engine green before being machined. Please see the attached pictures showing the inside of the rear case. Hopefully you can distinguish the engine green color inside the case, and more importantly tha...
by Rumbler
February 22nd, 2019, 10:02 am
Forum: AA Ford Discussion
Topic: Spacers for rear axle bumper?
Replies: 4
Views: 412

Spacers for rear axle bumper?

My early 28 AA stakebed has spacers between the frame and the rear axle bumpers. They appear original, but does anyone know if these were available from the factory? They look too nice to be an owner modification :D
by Rumbler
January 27th, 2019, 9:21 am
Forum: AA Ford Discussion
Topic: High speed rear axle
Replies: 22
Views: 1197

Re: High speed rear axle

Yep, thanks. I just received my order of the proper oil from Restoration Supply Co.

Brian
by Rumbler
January 26th, 2019, 5:20 pm
Forum: AA Ford Discussion
Topic: Rear spring shackle bolts
Replies: 5
Views: 402

Re: Rear spring shackle bolts

Thank you, Neil. Informative response as always. My April28 truck has hex head bolts, while I also have a July28 frame with rear springs that has square head bolts, hence my confusion. And then I couldn't find the RGJS reference. But now I know that each frame is correct for their respective month! ...
by Rumbler
January 26th, 2019, 2:18 pm
Forum: AA Ford Discussion
Topic: Rear spring shackle bolts
Replies: 5
Views: 402

Re: Rear spring shackle bolts

Yes, thanks Bob... looks like hex head wins!