Search found 127 matches

by Rumbler
August 16th, 2023, 10:17 am
Forum: AA Buy and Sell
Topic: Floor board
Replies: 4
Views: 29865

Re: Floor board

I made mine also, using Neil's excellent information. For authenticity, just remember they were mass produced and could therefore be a little rough. In other words, they weren't made by cabinet makers LOL. Finish was with a black wood preservative; I used Woodlife CreoCoat.
by Rumbler
May 19th, 2023, 8:42 am
Forum: AA Buy and Sell
Topic: Dual Hi transmission
Replies: 5
Views: 49178

Re: Dual Hi transmission

Jim,
Did you see my reply to your other post about my spoked wheels. I might be able to help you out with some early '28 stuff.

Brian
by Rumbler
May 10th, 2023, 1:07 pm
Forum: AA Ford Discussion
Topic: Hub cap installation
Replies: 4
Views: 25486

Re: Hub cap installation

It didn't take all that much force. I don't think it even moved the needle on the press. It mainly needed a centered, steady force to overcome the strong springiness of the tabs on the cap. I wouldn't think removal would be a problem.

Brian
by Rumbler
May 9th, 2023, 9:33 pm
Forum: AA Ford Discussion
Topic: Hub cap installation
Replies: 4
Views: 25486

Re: Hub cap installation

I tried tapping the hub caps into place, but they just wanted to spring back. So I ended up using two methods that I thought I'd share. Both utilized an adapter (see photo of adapter with blue masking tape) the same outside diameter as the outside of the hubcap. I also placed a circle made from pape...
by Rumbler
May 6th, 2023, 2:21 am
Forum: AA Ford Discussion
Topic: Spare Tire Carrier on 88-A Bed Trouble
Replies: 12
Views: 64370

Re: Spare Tire Carrier on 88-A Bed Trouble

It appears that the wheel is facing downward, with the lock ring toward the carrier. Is this the correct orientation?
by Rumbler
May 4th, 2023, 1:20 pm
Forum: AA Ford Discussion
Topic: Hub cap installation
Replies: 4
Views: 25486

Hub cap installation

I'm ready to install the hubcaps on my E28 (spoked) wheels and was wondering how folks have accomplished this. The retention tabs seem very stout. Does a single big hit work best or multiple smaller hits around the edge? How have you protected the cap from damage during installation?

Brian
by Rumbler
May 4th, 2023, 12:51 pm
Forum: AA Ford Discussion
Topic: 2023 Double A'er Mailed
Replies: 3
Views: 26154

Re: 2023 Double A'er Mailed

Another great publication, Neil! Received mine and read it cover to cover. As usual your technical documentation along with practical information for restoration is very useful! Thank you and keep up the great work!

Brian
by Rumbler
March 29th, 2023, 7:19 am
Forum: AA Ford Discussion
Topic: AA wheel manufacturing
Replies: 5
Views: 29413

Re: AA wheel manufacturing

Jim, Yes, I was fortunate that the wheels on my truck were in pretty good shape. I've been working on my truck for about 4 years and can see the finish line. Sounds like you're just getting started. I've done a lot of swap meets, rummaging around junk yards, and probably most importantly had a lot o...
by Rumbler
March 23rd, 2023, 8:32 am
Forum: AA Ford Discussion
Topic: AA wheel manufacturing
Replies: 5
Views: 29413

Re: AA wheel manufacturing

After a more detailed inspection I have found marks indicating that the wheel rims were rolled and then butt welded. Actually quite nice work given the early stage of welding technology available. Pictures of three of the joints below. Brian 2023-03-21 16.12.56 (1).jpg 2023-03-21 12.19.34 (1).jpg 20...
by Rumbler
March 20th, 2023, 12:24 pm
Forum: AA Ford Discussion
Topic: AA wheel manufacturing
Replies: 5
Views: 29413

AA wheel manufacturing

I'm in the process of restoring the wheels for my E28 AA project and just got them back from the blaster. I don't see any seam in the rim like on the car wheels, so I'm just curious if anyone knows how the AA rims were manufactured.

Brian
by Rumbler
August 30th, 2022, 10:45 am
Forum: AA Ford Discussion
Topic: Rear axle nut torque?
Replies: 0
Views: 80608

Rear axle nut torque?

I can't seem to find the proper torque for the rear axle nut in my early '28 worm drive axle. Anyone have better documentation?

Brian
by Rumbler
August 10th, 2022, 1:53 pm
Forum: AA Ford Discussion
Topic: Which hollow punch set?
Replies: 3
Views: 7080

Re: Which hollow punch set?

I have the hand/hammer style and it has worked good for everything I've asked of it so far (similar applications). I would think the drill version might be a little challenging to control the position and the material you are punching might twist along with the punch.
by Rumbler
July 29th, 2022, 5:00 pm
Forum: AA Buy and Sell
Topic: AA Universal Joint
Replies: 6
Views: 32670

Re: AA Universal Joint

Thanks for responding to my rebuild thread. I'd be interested in the early 6x10.
by Rumbler
July 28th, 2022, 1:39 pm
Forum: AA Ford Discussion
Topic: U-joint rebuild kit?
Replies: 6
Views: 76629

U-joint rebuild kit?

I ordered a standard u-joint rebuild kit (cross & bearings) and found that that the car kits won't work for the AA u-joints. They are smaller. Is there anyone that offers an AA u-joint rebuild kit?

Brian
by Rumbler
July 27th, 2022, 9:35 am
Forum: AA Buy and Sell
Topic: 28-29 AA torgue tube metal seal
Replies: 1
Views: 3180

Re: 28-29 AA torgue tube metal seal

Try Tom Godish in Portland, OR. He helped me with the inner felt seals for my rear axle. 503-282-2212

Brian