Search found 49 matches
- December 27th, 2022, 5:38 pm
- Forum: AA Buy and Sell
- Topic: Early 30 partial chassis available
- Replies: 0
- Views: 150237
Early 30 partial chassis available
Hi everyone, My friend Tom Warren from Amarillo, TX has a partial early 1930 frame available free to anyone that is need of parts for your project. Front crossmember and horns look good and there is the left rear spring assembly, among other usable parts. I am posting pictures for clarity. If you ar...
- August 18th, 2022, 8:35 pm
- Forum: AA Ford Discussion
- Topic: Which hollow punch set?
- Replies: 3
- Views: 9691
Re: Which hollow punch set?
I have a hammer set too. I used some that my grandfather had but it was incomplete and well worn. I purchased a nice set on Amazon. I have used it several times during my restoration. https://www.amazon.com/ABN-Hollow-Leath ... RG9K&psc=1
- July 8th, 2022, 5:47 pm
- Forum: AA Buy and Sell
- Topic: Running board aprons
- Replies: 3
- Views: 4023
Re: Running board aprons
You might try calling Snyder’s. They offer replacement splash aprons but shows they are out of stock. Here’s the link.. https://www.snydersantiqueauto.com/prod ... 6739&cat=0
- June 29th, 2022, 7:03 pm
- Forum: AA Ford Discussion
- Topic: 28 hand wiper blade
- Replies: 3
- Views: 6406
Re: 28 hand wiper blade
I had restored a 1927 TT closed cab and found that the 1928 AA closed cab used the same blade. I bought mine from Lang’s
https://www.modeltford.com/pl.aspx?t=s& ... ade&page=1
Or Snyder’s also has them
https://www.snydersantiqueauto.com/prod ... &cat=41933
https://www.modeltford.com/pl.aspx?t=s& ... ade&page=1
Or Snyder’s also has them
https://www.snydersantiqueauto.com/prod ... &cat=41933
- June 28th, 2022, 8:41 pm
- Forum: AA Ford Discussion
- Topic: 28 hand wiper blade
- Replies: 3
- Views: 6406
Re: 28 hand wiper blade
Here is a thread that I posted when working on my 1928 AA. Hope this helps.
http://forums.aa-fords.com/viewtopic.php?p=39502#p39502
http://forums.aa-fords.com/viewtopic.php?p=39502#p39502
- June 17th, 2022, 9:36 pm
- Forum: AA Buy and Sell
- Topic: WTB-1928 AA valve stems
- Replies: 1
- Views: 3441
WTB-1928 AA valve stems
I’m in search of five (or whatever you might have) Schrader 1822 valve stems, 725 nut, and bridge washers to finish my 1928 AA restoration. Please let me know if you have any or part that you would be willing to sell. Thanks for your interest.
Doug Lewis
Doug Lewis
- June 15th, 2022, 7:20 pm
- Forum: AA Ford Discussion
- Topic: Congratulations to the AA trucks judged at Morgantown!
- Replies: 1
- Views: 3398
Re: Congratulations to the AA trucks judged at Morgantown!
I had a great time with all the AA owners at the Morgantown meet this year! Several of us got to see Kieth Ernst’s AA’s and other trucks that he has collected! Keith and Bob Martino had vehicles on display, as well! Enjoyed the seminars and hats off to everyone involved to make this years meet a rea...
- March 15th, 2022, 9:21 pm
- Forum: AA Ford Discussion
- Topic: Front license plate clamp orientation
- Replies: 5
- Views: 9523
Re: Front license plate clamp orientation
Sounds good...thanks for your perspective. The oe clamp would probably have interference if mounted in the upward position! I’m still on a search for the 1”x1/4-20 bolt with 3/8 head. I have the correct nut.
- February 25th, 2022, 8:34 pm
- Forum: AA Ford Discussion
- Topic: Early 1928 AA floor mats
- Replies: 12
- Views: 13410
Re: Early 1928 AA floor mats
Would be interested in a correct floor mat for early AA with left hand brake. Thanks
- February 11th, 2022, 5:58 pm
- Forum: AA Ford Discussion
- Topic: Front license plate clamp orientation
- Replies: 5
- Views: 9523
Re: Front license plate clamp orientation
Thank you for the information! I’ll have to take a look at the suggested articles and see what direction their discussions take. Since the owner was responsible for installing the license plates, I would assume either position for the front plate would be acceptable for the purpose of fine point jud...
- February 9th, 2022, 8:36 am
- Forum: AA Ford Discussion
- Topic: Front license plate clamp orientation
- Replies: 5
- Views: 9523
Front license plate clamp orientation
I hope this is not going to sound anal, but for the purpose of judging I want to make sure that the front license plate clamps are oriented correctly and in the correct location. My 1928 AA will have the clamps with the ridge stamped in to the body of the clamp. I’ve seen pictures of the clamps moun...
- January 30th, 2022, 8:02 am
- Forum: AA Ford Discussion
- Topic: tire pressure
- Replies: 1
- Views: 4790
Re: tire pressure
Here’s a link that describes mounting and tire pressure. It recommends 50psi but I run about 45psi in my AA tires, as I don’t plan on loading the truck. https://aafordscom.ipage.com/aafords-pd ... lation.pdf
Hope this helps!
Hope this helps!
- December 23rd, 2021, 8:12 am
- Forum: AA Ford Discussion
- Topic: 88-A Platform Bed Wood
- Replies: 13
- Views: 21202
Re: 88-A Platform Bed Wood
In an answer to the additive, I am restoring my late 1928 AA and had my paint store mix up a satin finish Imron 3.5 Satin Plus paint color to imitate the non-buffed lacquer paint. My paint supplier is National Coatings & Supply. They were able to come up with a formula that looks like gunmetal b...
- November 26th, 2021, 9:02 pm
- Forum: AA Ford Discussion
- Topic: Early AA tire iron and jack handle
- Replies: 0
- Views: 135401
Early AA tire iron and jack handle
I’m in search of an early style tire iron and jack handle to complete my tool set for my 1928 AA.
- October 17th, 2021, 7:44 pm
- Forum: AA Buy and Sell
- Topic: WTB: Skid Strips for 88-A Platform Bed
- Replies: 2
- Views: 8070
Re: WTB: Skid Strips for 88-A Platform Bed
I had Bruce Horkey do the wood and metal skid strips for my TT. He is in the process of acquiring new wood for my AA 88a platform. He’s always busy but I highly recommend him!