Search found 62 matches
- March 6th, 2011, 4:30 pm
- Forum: AA Ford Discussion
- Topic: wheel puller
- Replies: 8
- Views: 5941
Re: wheel puller
This type tool is used on Cushman Motorscooters to remove flywheels and clutches. Other machines use them too. They work well.
- March 1st, 2011, 6:06 pm
- Forum: AA Ford Discussion
- Topic: What are these tools?
- Replies: 5
- Views: 3879
Re: What are these tools?
These are flat straps with an offset at the box wrench end
- March 1st, 2011, 3:54 pm
- Forum: AA Ford Discussion
- Topic: What are these tools?
- Replies: 5
- Views: 3879
What are these tools?
I learned that it fits the large socket used on the nut in the outer ends of the rear axle
- February 3rd, 2011, 8:11 pm
- Forum: AA Ford Discussion
- Topic: New Bare Floor Wood, How do I preserve it?
- Replies: 16
- Views: 7479
Re: New Bare Floor Wood, How do I preserve it?
. . Also, when you are closing the can, make ABSOLUTELY SURE there is NO paint on the lid sealing surface. If there is, you will not get it open again. I clean it & then coat the area with lithium grease. I use two self tapping screws for stuff like rust bullet. Put one in the lid for paint to ...
- February 2nd, 2011, 3:30 pm
- Forum: AA Club House
- Topic: 29 AA restorod
- Replies: 28
- Views: 254171
Re: 29 AA restorod
I have thought about this a lot so that the truck can be used often.
The rear axle seems to be what limits use of the truck, even more than the original engine.
what rear axle are you two using??
The rear axle seems to be what limits use of the truck, even more than the original engine.
what rear axle are you two using??
- February 2nd, 2011, 3:16 pm
- Forum: AA Ford Discussion
- Topic: Want engine block numbers
- Replies: 7
- Views: 4689
Re: Want engine block numbers
I have 27 blocks
Way too much trouble to get the numbers
sorry
Way too much trouble to get the numbers
sorry
- February 2nd, 2011, 3:14 pm
- Forum: AA Ford Discussion
- Topic: "Boiling" A Block
- Replies: 12
- Views: 6182
Re: "Boiling" A Block
Thanks FB. I enjoy my sanity too much to want to run for congress! :lol: Hey Luke, This quote illustrates Americas problem. We dont want in office those who want the job. They want to be important and want money. Those who could do a good job dont want the job. Thank you for the cleaning instructio...
- January 31st, 2011, 12:32 pm
- Forum: AA Ford Discussion
- Topic: How fast can the 28 Model AA go ?
- Replies: 10
- Views: 6464
Re: How fast can the 28 Model AA go ?
Tell us how to do this, pleasevtwinsideways wrote:. Before I left the shop the gentleman advised me on how to boil out the block while still in the truck .
- January 13th, 2011, 8:47 am
- Forum: AA Ford Discussion
- Topic: Express Boxes
- Replies: 11
- Views: 6123
Re: Express Boxes
I called last refuge and asked them if their beds are faithful productions and he said No.
He is a small business and doesnt care about detail. His products are more suited for the kind of guy who wants a rat rod
He is a small business and doesnt care about detail. His products are more suited for the kind of guy who wants a rat rod
- January 9th, 2011, 4:05 pm
- Forum: AA Ford Discussion
- Topic: Hydraulic Conversion
- Replies: 49
- Views: 23068
Re: Hydraulic Conversion
There is a guy in Arkansas making high speed gears for Ford TT trucks.
It might be a good idea to talk to him about hi speed AA gears
It might be a good idea to talk to him about hi speed AA gears
- January 9th, 2011, 1:44 pm
- Forum: AA Ford Discussion
- Topic: Long running boards
- Replies: 4
- Views: 2728
Re: Long running boards
Does this mean you have a set of boards for sale?
- January 9th, 2011, 12:55 pm
- Forum: AA Ford Discussion
- Topic: Super Good AA Truck Club Member
- Replies: 4
- Views: 3423
Re: Super Good AA Truck Club Member
hmmm, that might be the same fella that emailed me from northern Minnesota. He said that since early this morning the snow has been falling heavily and it is nearly waist high. The temperature is dropping below zero and the north wind is increasing, and his wife has done nothing but look through the...
- January 9th, 2011, 12:16 pm
- Forum: AA Ford Discussion
- Topic: Hydraulic Conversion
- Replies: 49
- Views: 23068
Re: Hydraulic Conversion
It seems to me that if the original brakes worked OK when hauling 1 1/2 tons in 1931, it ought to be OK now. However, I have been thinking about Hydraulics and wonder if the 1939 1 1/2 ton hydraulic brakes will bolt on to my 31, much like everyone has been doing for 70 years on the 1/2 ton Fords. I ...
- August 19th, 2006, 5:29 pm
- Forum: AA Ford Discussion
- Topic: AA Hub for the throwout bearing
- Replies: 4
- Views: 3837
With 41 views, it would seem that someone knows the answer to this question. Thank you for the reply Neil, but ahhh, no, I am not talking about any REAR hub. I asked about the THROWOUT BEARING part number -7580- and its associated HUB AA 7561-A that slides on the transmission front bearing retainer ...
- August 15th, 2006, 7:36 pm
- Forum: AA Ford Discussion
- Topic: winch for PTO
- Replies: 2
- Views: 3367
me, too
I would like to buy a power take off. They were the same from 1929 til 1947