aa-fords.com

I have a set of 4 -1928 - 29 20 inch spoked wheels with rings and 1 hub cap for sale.They are rusty and have some peeling paint but will restore nicely as they're very sound and without defects.
Im asking $400 for the set including the rare hub cap.Pics are available upon request.

Thanks for the help and the photo. Mine is as Bud describes it and is riveted without removable caps or clips.As it worked out I found one that a friend had that came off of a 1931 and it hooks up perfectly and is the same diameter & length with servicable caps.

Tony G

Hi Guys, My 1929 AA has a loose universal joint just behind the trans . I took it out and cleaned it and it has 2 holes worn oblong . This is the type thats riveted together. The truck has a 4 speed with a worm drive rear end. Are these joints available?I have visions of taking it apart & weldin...

Rem,
Its a commercial cowl with regular body parts but the interior roof wood is different.The doors also look a little different compared to my '31. They are wood clad with steel.If I can learn to post pics here I'll do it.

Hi AA'ers I have a 82B Budd cab I'm restoring and I just came across an 82A sitting in someones back yard rusting and bought it along with 3 truck loads of parts.It's a 1929 Falstaff beer truck with the original bill of sale from the company.It has all of the lettering painted on the doors and stake...

I have a bare frame of a 1932 BB truck for sale. It was a doodle bug and I bought it for the brakes & drums. Also have the front axle & steering along the bevel gear rear axle and shortened torque tube & 4 speed (needs work). Im asking $ 400. for all of it but needs to be picked up in NH...

Hi Neal,
Thats what I figured the challenge is. If someone has a diagram showing measurements for both wells and their placement on the fender I can figure out if expanding the opening in the car welled fender will leave a gap somewhere. Maybe its possible to take a car well and modify it.

TG

Im looking for a set of front fenders for my '31 AA 82B. I hear that the spare tire well is larger than the auto's. If there's no chance of finding a direct replacement could I convert an already car welled fender by fabricating a larger well to accomodate the 20 inch tire? I have a chance to buy a ...

I would like to buy an AA 4 speed shift knob if anyone has an extra one.

Thanks,
TG

Im about to remove the differential and rear suspension for disassembly, inspection and rebuild.Its a '31 AA. Im seeing that some bolts & nuts are square head. Can these be purchased ?My 2nd question is can anyone recommend a book, manual, or publication that will give detailed part assembly dia...

Hi fellow AA'ers. As I'm disassembling and removing the dash rail in my 31 AA I noticed a strange hole behind it. On the passenger side when I tilt out the windshield there is a 1/2 round groove on the top of the fuel tank. On the face of the dash rail there is a large approx. 1 inch hole with a sma...

Knuck, Looking at a pic of the KRW tool (if I saw the right one) didnt instill confidence in its ability to remove stuck 80 year old hubs.I made a whopper of a puller for mine. I took a hub out of a rotted out wheel and welded a wide pipe/tubing over the center hole and welded a large fine threaded ...

I suppose the best way to go for me is to put up a 6.00x20 in the bracket and see if the door opens fully.Thanks again for all who looked up and gave information.
TG

Thankyou for the info. I dont have the correct door at this time. Either I find one or do some serious fabricating or forget about the spare mount. I'd like to keep it and use it on the truck.I dont think the repro wells are correct for AA wheels so thats another hurtle.

Thanks again All,
TG

What is the differences in doors for a spare tire welled fender?