Search found 31 matches

by Bob F
May 1st, 2019, 3:13 pm
Forum: AA Ford Discussion
Topic: fmaatc.org and aafords.com sites combined
Replies: 5
Views: 3663

Re: fmaatc.org and aafords.com sites combined

Excellent got my book yesterday I just cant put it down, very well done!
Thanks, Bob F
by Bob F
March 9th, 2019, 3:22 pm
Forum: AA Ford Discussion
Topic: Worm Drive Gear Ratio
Replies: 4
Views: 3869

Re: Worm Drive Gear Ratio

Thanks Rumbler, I just needed to confirm my finding and that posting was very helpful Now I just need to take it apart and check the condition of the worm & gear, I want to swap out my low speed in my 28.
by Bob F
March 9th, 2019, 2:05 pm
Forum: AA Ford Discussion
Topic: Worm Drive Gear Ratio
Replies: 4
Views: 3869

Worm Drive Gear Ratio

I have a 28 Worm Drive Rear End without emergency brakes, the A or B stamping is unreadable. I jacked up one wheel,and turned the drive shaft a little more than 2 and a half turns, the wheel made 1 complete turn, now do I multiply that by 2 to get my ratio? Thanks for any help! Bob F
by Bob F
May 13th, 2018, 10:31 am
Forum: AA Ford Discussion
Topic: Film footage of AA's
Replies: 7
Views: 6632

Re: Film footage of AA's

Great films Really NEET!!! Thanks
by Bob F
May 13th, 2018, 10:30 am
Forum: AA Ford Discussion
Topic: Film footage of AA's
Replies: 7
Views: 6632

Re: Film footage of AA's

Great films Really NEET!!!
by Bob F
December 10th, 2017, 8:33 am
Forum: AA Ford Discussion
Topic: High Speed Gears - worm drive
Replies: 4
Views: 3889

Re: High Speed Gears - worm drive

How much are you asking?
by Bob F
October 6th, 2017, 12:51 pm
Forum: AA Buy and Sell
Topic: AA REAR SPRING BRACKETS.
Replies: 11
Views: 10591

Re: AA REAR SPRING BRACKETS.

I noticed in my June of 29 Parts Price List book these were listed an AA-5785-AR Rear spring pivot bracket , a first version maybe? On my early 29 AA I have the pivots that are just attached to the side of the frame ( AA-5785-b ) By the way how much are asking for these?




Bob F
by Bob F
September 17th, 2017, 7:49 pm
Forum: AA Ford Discussion
Topic: HERSHEY show details
Replies: 4
Views: 3673

Re: HERSHEY show details

Hershey is great, I believe there is a campground outside of the Hershey Park grounds. You also might try to contact the Hershey Region Antique Automobile Club of America they have a website just on this event.
by Bob F
August 18th, 2017, 3:31 pm
Forum: AA Ford Discussion
Topic: 88-A platform Sills?
Replies: 6
Views: 4546

Re: 88-A platform Sills?

Makes sense cause a lot of the original AA trucks I've seen the AA88084 sits a little forward on the AA-88030 side sills. I've also noticed that on some 82-A cabs the rear sub frame cross member had 2 notches possibly for body stop AA-5122.(that another topic) Thanks again Neil Bob F
by Bob F
August 15th, 2017, 8:03 pm
Forum: AA Ford Discussion
Topic: 88-A platform Sills?
Replies: 6
Views: 4546

Re: 88-A platform Sills?

Thanks Dave , That seems like a good idea, then just lay the sill plates on the sill, under the cross members , clamp it then mark the sill plates and the bolt holes off the angles.( sounds like the plan! )
by Bob F
August 15th, 2017, 7:36 pm
Forum: AA Buy and Sell
Topic: AA-5455-B Front Spring Clip
Replies: 1
Views: 2542

AA-5455-B Front Spring Clip

I'm looking for a nice pair of ( AA-5455-B Front Spring Clips ) The U-bolts that hold front axle spring to the frame ,for a 12 leaf spring , on my early 29 AA .They are a little wider and longer than an A ,2 5\16" wide and 4 3\8" long on the inside dimension. Thanks Bob F
by Bob F
August 15th, 2017, 7:00 pm
Forum: AA Ford Discussion
Topic: 88-A platform Sills?
Replies: 6
Views: 4546

88-A platform Sills?

Again working on my 29 AA Stake Truck , with the 88-A Platform Bed,and was wondering if any one the dimensions for the bolt hole placement for the bed sills to the Platform angles and brackets (AA-88030,d3 Sill , floor sides). I've gotten the dimensions of the sills form the 88-A Platform details on...
by Bob F
March 17th, 2017, 7:02 pm
Forum: AA Buy and Sell
Topic: Rear AA fender bracket
Replies: 10
Views: 8010

Re: Rear AA fender bracket

The dimention of an "A" ubolt on the inside measues 2-1/8" across and the inside length is 3-3/4", where the 28-29 "AA" ubolt measures 2-3/8 across on the inside ,now I'm not sure on the length for the 12 leaf spring but I think it's about 4-1/2" to 5 or 5-1/2"...
by Bob F
March 16th, 2017, 8:56 pm
Forum: AA Buy and Sell
Topic: Rear AA fender bracket
Replies: 10
Views: 8010

Re: Rear AA fender bracket

Do you have an extra pair of an (AA-5455-B front spring clip), the u-bolts that hold the 12 leaf front spring to the frame. If I think of anything else I'll post it. thx
by Bob F
March 16th, 2017, 3:07 pm
Forum: AA Buy and Sell
Topic: Rear AA fender bracket
Replies: 10
Views: 8010

Re: Rear AA fender bracket

Hi stakebed, bob f again, I met you at Ken's swap meet up in Woodstock Il last August you had just bought a nice pair of rear fender brackets-I was to late! I showed you and aaholic some stakes I'd just bought on ebay earlier that month. Well anyhow I'll have a space set up there so bring those part...