Excellent got my book yesterday I just cant put it down, very well done!
Thanks, Bob F
Search found 31 matches
- May 1st, 2019, 3:13 pm
- Forum: AA Ford Discussion
- Topic: fmaatc.org and aafords.com sites combined
- Replies: 5
- Views: 3880
- March 9th, 2019, 3:22 pm
- Forum: AA Ford Discussion
- Topic: Worm Drive Gear Ratio
- Replies: 4
- Views: 4255
Re: Worm Drive Gear Ratio
Thanks Rumbler, I just needed to confirm my finding and that posting was very helpful Now I just need to take it apart and check the condition of the worm & gear, I want to swap out my low speed in my 28.
- March 9th, 2019, 2:05 pm
- Forum: AA Ford Discussion
- Topic: Worm Drive Gear Ratio
- Replies: 4
- Views: 4255
Worm Drive Gear Ratio
I have a 28 Worm Drive Rear End without emergency brakes, the A or B stamping is unreadable. I jacked up one wheel,and turned the drive shaft a little more than 2 and a half turns, the wheel made 1 complete turn, now do I multiply that by 2 to get my ratio? Thanks for any help! Bob F
- May 13th, 2018, 10:31 am
- Forum: AA Ford Discussion
- Topic: Film footage of AA's
- Replies: 7
- Views: 7042
Re: Film footage of AA's
Great films Really NEET!!! Thanks
- May 13th, 2018, 10:30 am
- Forum: AA Ford Discussion
- Topic: Film footage of AA's
- Replies: 7
- Views: 7042
Re: Film footage of AA's
Great films Really NEET!!!
- December 10th, 2017, 8:33 am
- Forum: AA Ford Discussion
- Topic: High Speed Gears - worm drive
- Replies: 4
- Views: 4383
Re: High Speed Gears - worm drive
How much are you asking?
- October 6th, 2017, 12:51 pm
- Forum: AA Buy and Sell
- Topic: AA REAR SPRING BRACKETS.
- Replies: 11
- Views: 12648
Re: AA REAR SPRING BRACKETS.
I noticed in my June of 29 Parts Price List book these were listed an AA-5785-AR Rear spring pivot bracket , a first version maybe? On my early 29 AA I have the pivots that are just attached to the side of the frame ( AA-5785-b ) By the way how much are asking for these?
Bob F
Bob F
- September 17th, 2017, 7:49 pm
- Forum: AA Ford Discussion
- Topic: HERSHEY show details
- Replies: 4
- Views: 4047
Re: HERSHEY show details
Hershey is great, I believe there is a campground outside of the Hershey Park grounds. You also might try to contact the Hershey Region Antique Automobile Club of America they have a website just on this event.
- August 18th, 2017, 3:31 pm
- Forum: AA Ford Discussion
- Topic: 88-A platform Sills?
- Replies: 6
- Views: 4833
Re: 88-A platform Sills?
Makes sense cause a lot of the original AA trucks I've seen the AA88084 sits a little forward on the AA-88030 side sills. I've also noticed that on some 82-A cabs the rear sub frame cross member had 2 notches possibly for body stop AA-5122.(that another topic) Thanks again Neil Bob F
- August 15th, 2017, 8:03 pm
- Forum: AA Ford Discussion
- Topic: 88-A platform Sills?
- Replies: 6
- Views: 4833
Re: 88-A platform Sills?
Thanks Dave , That seems like a good idea, then just lay the sill plates on the sill, under the cross members , clamp it then mark the sill plates and the bolt holes off the angles.( sounds like the plan! )
- August 15th, 2017, 7:36 pm
- Forum: AA Buy and Sell
- Topic: AA-5455-B Front Spring Clip
- Replies: 1
- Views: 2836
AA-5455-B Front Spring Clip
I'm looking for a nice pair of ( AA-5455-B Front Spring Clips ) The U-bolts that hold front axle spring to the frame ,for a 12 leaf spring , on my early 29 AA .They are a little wider and longer than an A ,2 5\16" wide and 4 3\8" long on the inside dimension. Thanks Bob F
- August 15th, 2017, 7:00 pm
- Forum: AA Ford Discussion
- Topic: 88-A platform Sills?
- Replies: 6
- Views: 4833
88-A platform Sills?
Again working on my 29 AA Stake Truck , with the 88-A Platform Bed,and was wondering if any one the dimensions for the bolt hole placement for the bed sills to the Platform angles and brackets (AA-88030,d3 Sill , floor sides). I've gotten the dimensions of the sills form the 88-A Platform details on...
- March 17th, 2017, 7:02 pm
- Forum: AA Buy and Sell
- Topic: Rear AA fender bracket
- Replies: 10
- Views: 8121
Re: Rear AA fender bracket
The dimention of an "A" ubolt on the inside measues 2-1/8" across and the inside length is 3-3/4", where the 28-29 "AA" ubolt measures 2-3/8 across on the inside ,now I'm not sure on the length for the 12 leaf spring but I think it's about 4-1/2" to 5 or 5-1/2"...
- March 16th, 2017, 8:56 pm
- Forum: AA Buy and Sell
- Topic: Rear AA fender bracket
- Replies: 10
- Views: 8121
Re: Rear AA fender bracket
Do you have an extra pair of an (AA-5455-B front spring clip), the u-bolts that hold the 12 leaf front spring to the frame. If I think of anything else I'll post it. thx
- March 16th, 2017, 3:07 pm
- Forum: AA Buy and Sell
- Topic: Rear AA fender bracket
- Replies: 10
- Views: 8121
Re: Rear AA fender bracket
Hi stakebed, bob f again, I met you at Ken's swap meet up in Woodstock Il last August you had just bought a nice pair of rear fender brackets-I was to late! I showed you and aaholic some stakes I'd just bought on ebay earlier that month. Well anyhow I'll have a space set up there so bring those part...