aa-fords.com

Thanks for the info.
Wanted one out of solid boards but I guess an off the shelf one will have to work.
Not much of a wood worker. Can take a nice chunk of wood and turn it into saw dust.

Steve

Is there anyone making reproduction floor boards for the AA's 29 with dual hi/low solid wood board version
Also wiring harness and long mirror arms

Steve

Hi
I need a set of rear radius rods for a 1928 AA with single brakes. They only have one hole to mount a brake lever.
Do not need to be NOS or Show just good usable ones. Would also consider only the forged ends that mount to the axle housing.

Thanks Steve in Indiana taillight@hrtc.net

Hi
I have the left overs of a rear end which was used for parts. The ring gear unit is missing. Along with some brake parts. Do have the drums.
it is in Morristown, IN SE of Indianapolis. If you need it come and pick it up.
I will try and see what is left if you need more info by Tuesday.

Steve

Hi need info on greasing the worm drive. 1. Are the two top worm gear bearings greased or does the oil from the lower gear make it up there. Also I guess it is 600w oil. 2. Is there a grease seal installed in the rear of the Dual Hi drive where the U joint connects from the rear drive shaft? The onl...

Still looking for the AA U joint 6 spline on one end and 10 spline on the other. Just needs to be a good usable one.

thanks Steve

Wanted,
The u joint that connects the dual hi trans to the rear drive shaft.
I think it has a small "normal" 6 spline on one end and a larger 8 spline to fit the larger
AA drive shaft.

Thanks Steve

More photos, Also note where the spare tire mount is in front of the rear spring front mount.
Yes it does have a high speed gear in the rear and the under drive

Hi again
I made an error in the last message The cab is a 82A
I have attached photos of my tk showing the brake system in question.Sorry but they are not too good
Comments accepted

Me again The front brakes are just like the A type except that the brake drums are heavy with right and left thread lug nuts and yes the rods are longer. The rear are single brakes with only the service brakes and NO emg brakes nor is that any way to install them. Also the rear radius rods are made ...

Hi again Yes the truck looks like a left over. SN is AA1898655 both the frame and motor #'s match. and it has a 79A cab. There was no bed but the clamps came with it (second type by the news letter with the tube type spacers) It has long running boards but no rear fenders. Also has side mount spare ...

I have a May 29 AA that has wire wheels, single brakes in the rear, emg brake handle right side of shift tower and over under drive unit. The emg brake cross shaft is on the rear side of the cross member and service brake shaft goes thru the frame. I think it is a real left over AA. What I need is a...

Wanted the two rear radius rods / wishbone for 28 / 29 AA. these are the ones for single brake system and only have one hole for the brake actuator arm. Also need all of the brake parts including front cross shaft for the left hand style emergency brake setup including all mounting parts and bracke...

Hi I need one early jack handle for the AA and one later handle.
or plans so I can reproduce them.

Thanks

Hi
Just thinking out loud.
It someone started making repo valve stems that closely match the originals
How many out there in AA land would want to get them

28/29 style
30/31 style

No details just fishing for people in need