Search found 77 matches

by njcar757
March 14th, 2019, 6:14 pm
Forum: AA Ford Discussion
Topic: Worm Drive Gear Ratio
Replies: 4
Views: 218

Re: Worm Drive Gear Ratio

On my 29 the letter capital B is not vertical, it is laid on its side.
by njcar757
January 18th, 2019, 6:33 am
Forum: AA Ford Discussion
Topic: AA emergency toggle lever
Replies: 3
Views: 393

Re: AA emergency toggle lever

AA magazine april 2010 pg 4 & 5.
carry on
by njcar757
January 14th, 2019, 5:39 am
Forum: AA Ford Discussion
Topic: Aa rear brake
Replies: 8
Views: 531

Re: Aa rear brake

Double AA'er Magazine april 2010, pg 4 & 5, I used it when I rebuilt mine.
carry on nick c
by njcar757
January 13th, 2019, 6:43 pm
Forum: AA Ford Discussion
Topic: Brake rod anti rattle return springs
Replies: 1
Views: 334

Brake rod anti rattle return springs

Working on 29 AA brakes, there are 2 long return springs on front brake rods and 2 short return springs on 2 rear rods. If I order a 6 piece spring kit for the A car, will these fit the 29 AA ?
thanks nick c
by njcar757
January 8th, 2019, 3:09 pm
Forum: AA Ford Discussion
Topic: King pins
Replies: 9
Views: 1632

Re: King pins

28-29 AA had a front axle similar to the A, the difference would be the spindle and hub, the king pins were .812 up to oct. 1929, after that the front axle on the AA was heavier with bigger king pins, spindle and hubs. I would want only .001 clearance on king pin to bushing. If your on a budget, I w...
by njcar757
October 5th, 2018, 5:24 am
Forum: AA Buy and Sell
Topic: 3 tires 6.00 x 20
Replies: 3
Views: 914

Re: 3 tires 6.00 x 20

Tires were sold locally.
thanks nick c
by njcar757
September 28th, 2018, 3:38 pm
Forum: AA Buy and Sell
Topic: 3 tires 6.00 x 20
Replies: 3
Views: 914

Re: 3 tires 6.00 x 20

Ocala fl.
by njcar757
September 27th, 2018, 5:35 pm
Forum: AA Buy and Sell
Topic: 3 tires 6.00 x 20
Replies: 3
Views: 914

3 tires 6.00 x 20

3 US Royals, 8 ply rating, hy-rayon, these tires have never been mounted on a wheel but do have dry rott cracks. Price 3 for $90.00

email njcar757@gmail.com
by njcar757
January 17th, 2018, 8:33 am
Forum: AA Ford Discussion
Topic: Top Wood question
Replies: 4
Views: 1130

Re: Top Wood question

First call Snyders. When I bought my truck, it came with a new top wood kit, I don't know who made it, The pieces did not have a perfect fit, I made small wood shims with gorilla glue to fill in places, then I used a small grinder with 4 1/2" auto body grinding disk to blend in. Measure corner to co...
by njcar757
January 15th, 2018, 8:14 am
Forum: AA Ford Discussion
Topic: 28/29 warford rebuild
Replies: 3
Views: 952

Re: 28/29 warford rebuild

It would help if someone could post a schematic of all the parts and part numbers and part name. When you view the schematic, you need to know that part # 2038 and part number 1342 are reversed and in the wrong place. Hope you got the thrust washer 2038 if not I've posted the dimensions before on th...
by njcar757
August 16th, 2017, 8:55 am
Forum: AA Ford Discussion
Topic: 90* brass valve stems
Replies: 0
Views: 1063

90* brass valve stems

I have mounted 4 nos tire and tubes and flaps, I noticed one of the valve stems did not have a nut or washer, the brass valve stem rotates in the tube, I have a nut and flat washer that will fit the valve stem, what if any sealer should go into the tube pocket or around the stem just below the washe...
by njcar757
August 12th, 2017, 6:20 am
Forum: AA Ford Discussion
Topic: 28 worm drive brake drums
Replies: 10
Views: 2419

Re: 28 worm drive brake drums

All model A's and AA's came with pressed steel drums, cast iron drums are now available only for the model A cars and pu's. Model A car's and pu's had 11" drums. The AA's had 11" drums on front only but are different from the cars and will not fit AA trucks, because of there shape and lug pattern. I...
by njcar757
August 11th, 2017, 5:24 am
Forum: AA Ford Discussion
Topic: what lubricates roller bearings in AA drive shaft, outer shaft hot to touch
Replies: 10
Views: 2135

Re: what lubricates roller bearings in AA drive shaft, outer shaft hot to touch

Yes, your correct about the bump and recess. I thought the race was correct when I installed it, any slight tap will cause one of the pointed ends of the split race to push out slightly. It was hard to notice because of the grease in the race until I wiped it clean.
nick c
by njcar757
August 10th, 2017, 4:51 pm
Forum: AA Ford Discussion
Topic: what lubricates roller bearings in AA drive shaft, outer shaft hot to touch
Replies: 10
Views: 2135

Re: what lubricates roller bearings in AA drive shaft, outer shaft hot to touch

Heres what gave me fit when trying to install the torque tube which is similar to what you worked on. I had to replace the seal which means I had to remove the needle bearing and the race, it was hard to get the race in the perfect place, the bearing would go in but not all the way, it looked OK but...
by njcar757
August 10th, 2017, 10:56 am
Forum: AA Ford Discussion
Topic: How wide between running board outer edges?
Replies: 18
Views: 4076

Re: How wide between running board outer edges?

I have 29 aa bare frame, just sandblasted and painted, my running boards are 70" long, I sat them on the brackets and lined up the holes, at the front where the fenders bolt on it's 66 1/2" to the outside, the catalogue state that a 29 aa R B should be 35 1/2" long, so I measured back 35 1/2" and th...