Search found 79 matches

by njcar757
June 13th, 2010, 4:57 am
Forum: AA Ford Discussion
Topic: Drilling Frame Flanges
Replies: 12
Views: 3714

Re: Drilling Frame Flanges

Hi Tom. Can you tell us how do you put gas in the tank? Is the gas gauge about 2" in diameter like other gauges? I had the same idea except I'll make mine out of 16 ga steel, if so where can I buy the sending unit and gauge?
thanks nick
by njcar757
June 3rd, 2010, 6:47 am
Forum: AA Ford Discussion
Topic: Clutch disc diameters?
Replies: 8
Views: 2265

Clutch disc diameters?

I own a 1929 AA, when I took it apart, it had a 10" clutch disc in it. I also own a 1930 AA swamp buggy, when I took it apart, it had a 10' clutch disc in it. It is my under standing that all the A automobiles feft the factory with 9' clutch discs. Is it safe to assume that all the AA's left the fac...
by njcar757
April 24th, 2010, 5:37 pm
Forum: AA Ford Discussion
Topic: Hydraulic Conversion
Replies: 49
Views: 10798

Re: Hydraulic Conversion

Hi guys. I own a 29 AA , I haven't started the restoration process yet. I have measured the bolt pattern with calipers and I'm sure its 5 on 6 7/8 circle. I also have a 30 AA, the rims are different but the bolt pattern is the same. I've done alot of thinking on brakes. Recently on the Fordbarn site...
by njcar757
January 19th, 2010, 4:02 pm
Forum: AA Ford Discussion
Topic: 29 AA flat bed wood
Replies: 11
Views: 3360

29 AA flat bed wood

Did the wood on a 29 AA flat bed measure 1 1/4" thick and 7" wide? It looks like there was 9 boards and there was 8 metal strips? Were there any metal strips used on the two outside boards closest to the side pockets or did they use only carriage bolts? Was the wood rough sawn or was it planed on on...