aa-fords.com

I am getting ready to install the cab back on the frame. 1930 82A cab (28/29 style). The information I have shows the back two blocks on each side with rubber under the wood. The front long block does not show any wood under the block. I believe when I removed the cab the front wood block was locate...

1) Was the rear glass installed prior to painting the cab during origanal assembly

2) What is the correct process for installing the windshield? I have purchased the rubber and the glass. The rubber looks much wider then the grove in the frame.

Thanks for the information.

I have been installing the roof wood in my 82A (April 1930) cab and I have a few questions. 1) I have two pieces approximately 2 feet long that are ~5/8 X 1" that are drilled and counter sunk for four screws. Where do these go? 2) I tried multple different ways but the wood joints do not fit to...

I just got back from the 100 year model t celebration. I have not opened the package of bed strips yet. I will open and answer your question tommorrow. Thanks

Thanks - this is exactly what I needed.

I had a company make new ones for me because I had one that was completely rusted thru. I have several that are in good shape. Are you still looking for some?

Does the frame welt that goes under the fenders and the cab go all the way to the end of the rear frame? I have a flat bed and was wondering if the frame welt is installed under the wood sills. Is the original one continous piece from the front to the back?

Does anyone have the paint codes for rock moss green paint?

I have been working on the 29 style cab on my early 1930 stake truck. I have the following questions: 1) Does the bead welting go in one continuous section from the lower cowl panel over the gas tank to the other lower cowl panel? 2) The original wood roof was completely gone when I got the truck. I...

I am in need of a drivers side corner for my 28-29 cab. All I can find is the cab corners sold in pairs. Does anyone have just the drivers side corner for sale? Does any one need the passenger side such that we can purchase both and each get one. Thanks

I have had two transmissions that had cracks as you describe. Besides looking for just a case, you may need to look for some shafts and gears. My transmissions cracked due to getting water inside and freezing. This water caused some additional damage to my shafts and gears.

Thanks for the pictures. Is there anything that goes in the front of the running board where it attaches to the fender? This area looks a little open on mine.

Neil
The truck in the picture you posted is exactly like my truck. I have installed the fenders, aprons and running boards to just work out the dents in the fenders. I did not put down the welting or beading. The cab is sitting in my other garage waiting to be installed. Thanks

I have an early 30 aa that I would like to get some information on how the body wood is assembled. How the fenders, radiator and hood are installed. Welting and bead trim installation. What is the best sources with pictures for this? Thanks in advance.