Hello Luke,
I dont believe there were any numbers on the race, however there probably are some on the roller bearing frame, ------ contact 1crosscut he as just overhauled his and he may have noted the numbers ------ IF the bearing is still available and I am sure it will come with the race.
Search found 400 matches
- July 1st, 2013, 6:35 pm
- Forum: AA Buy and Sell
- Topic: WTB: Race for main bering for dual high
- Replies: 5
- Views: 4143
- June 24th, 2013, 12:26 pm
- Forum: AA Ford Discussion
- Topic: U-JOINT ID
- Replies: 2
- Views: 2573
U-JOINT ID
I picked this u-joint up at a swap meet this past weekend, it has the same cross and bearing size that the model has, and the bearings are snug ---- It isn't for an AA that I know of, it has 16 splines both ends, the diameter is just short of and inch and a quarter, and is five and a half inches lon...
- June 4th, 2013, 3:06 pm
- Forum: AA Buy and Sell
- Topic: 29 Front spindle
- Replies: 1
- Views: 2000
29 Front spindle
I am replacing the front axle due to wear in the right side spindle bolt bore and zero camber in the left side, it is possible that the spindle maybe bent , so I am asking if anyone may have one available should I need it, must have good bearing surfaces and threads.
Thanks Brian T.
Thanks Brian T.
- May 28th, 2013, 12:56 pm
- Forum: AA Ford Discussion
- Topic: AA Door Alignment
- Replies: 1
- Views: 2546
Re: AA Door Alignment
Hello JW,
Here is a LINK to Marco Tahtaras Web site that explains the adjustments, they are for a Fordor sedan but the method is the same, have fun.
http://www.abarnyard.com/workshop/door-1.htm
Here is a LINK to Marco Tahtaras Web site that explains the adjustments, they are for a Fordor sedan but the method is the same, have fun.
http://www.abarnyard.com/workshop/door-1.htm
- May 19th, 2013, 5:10 pm
- Forum: AA Ford Discussion
- Topic: Brake cross shaft problems
- Replies: 7
- Views: 5035
Re: Brake cross shaft problems
The rivits appear to be 1/4 inch, if you already have a hole drilled use a punch that will fit in the hole, you will need a helper the other side to buck up the arm with something hollow such as an old socket, they will need to keep some pressure on while you hammer out the rivit.
Good luck.
Good luck.
- May 19th, 2013, 7:50 am
- Forum: AA Ford Discussion
- Topic: Brake cross shaft problems
- Replies: 7
- Views: 5035
Re: Brake cross shaft problems
Hello Stakebed,
As Neil mentioned those rivits are tough to remove it takes 2 to remove and refit them, if the shaft is rusted thru as bad as you say then it would be best to find another shaft, Snyders have a repair kit that has the bushings and rivits.
As Neil mentioned those rivits are tough to remove it takes 2 to remove and refit them, if the shaft is rusted thru as bad as you say then it would be best to find another shaft, Snyders have a repair kit that has the bushings and rivits.
- May 3rd, 2013, 7:06 am
- Forum: AA Buy and Sell
- Topic: boot.....
- Replies: 16
- Views: 10845
Re: boot.....
The left hand E-brake boot is completely different from the boot shown, here is a pic of the blanking plate which shows the shape, they do have the retainer plate also , but no boot.Chris Haynes wrote:Why make them if you can buy them from Mac's?
http://macsautoparts.com/images/400/A2706BO_pJPG.JPG
- April 29th, 2013, 3:59 pm
- Forum: AA Club House
- Topic: AAs at the Orange county model A club pancake breakfast
- Replies: 5
- Views: 6284
AAs at the Orange county model A club pancake breakfast
Well it was a good day at the Orange county pancake breakfast yesterday for Double As, two winners in best commercial took first pace, myself for 28-29 and Mike James for 30-31. Mike is from Fontana Ca, and so is his truck, it was sold by a Ford dealer there to a vineyard in 1931 and used for many y...
- April 29th, 2013, 9:31 am
- Forum: AA Club House
- Topic: what a newsletter!
- Replies: 12
- Views: 10326
Re: what a newsletter!
Hello JW,
The outer rim on the rear wheels are often painted to match the front it makes they appear that they have a lock ring, I do not believe that is the way the factory did them.
The outer rim on the rear wheels are often painted to match the front it makes they appear that they have a lock ring, I do not believe that is the way the factory did them.
- March 25th, 2013, 12:06 pm
- Forum: AA Buy and Sell
- Topic: High speed rear end advertised on ebay
- Replies: 12
- Views: 5491
Re: High speed rear end advertised on ebay
Actually I think the it is one of the nicer ones your going to find. Dave I have to agree, However I would not buy one that I could not see all the teeth all the way around, the reason being if this axle had been parked with 90w-140w EP oil which contains sulfur, this causes the bronze to soften ca...
- February 11th, 2013, 4:23 pm
- Forum: AA Buy and Sell
- Topic: Teacup tail lights For Sale
- Replies: 8
- Views: 5560
Re: Teacup tail lights For Sale
Probably buy this bundle for $60-$70 at a swap meet, late in the day and sometimes dependent on the weather, swap meet vendor prices can be miles apart for the same items, I have found many good pieces in the dollar piles, you just need to know what you want and don't need.
- February 8th, 2013, 4:09 pm
- Forum: AA Ford Discussion
- Topic: AA Floor Mat
- Replies: 5
- Views: 3414
Re: AA Floor Mat
Why is a mat for a '28/'29 AA different than an A? Don't they both use the same 3 speed tranny? The only difference I see would be the holes for the [you know what I mean] Hi-Low unit, after measuring I cut mine out with a hole saw. BTW how was Turlock?, I had an economy trip worked out this year, ...
- February 8th, 2013, 3:38 pm
- Forum: AA Ford Discussion
- Topic: 29 AA Body Wood Question
- Replies: 8
- Views: 5456
Re: 29 AA Body Wood Question
Hello Dave,
Welcome to the board, if you do not get an answer here go to Fordbarn, this will broaden your search horizon, you may also consider joining the FMAATC club.
http://www.fordbarn.com/forum/forumdisplay.php?f=3
Welcome to the board, if you do not get an answer here go to Fordbarn, this will broaden your search horizon, you may also consider joining the FMAATC club.
http://www.fordbarn.com/forum/forumdisplay.php?f=3
- February 7th, 2013, 8:37 am
- Forum: AA Ford Discussion
- Topic: AA Floor Mat
- Replies: 5
- Views: 3414
Re: AA Floor Mat
Hello Pat,
Snyders and Berts still show the rubber mat on there web sights, are they saying they no longer supply them?, I got mine about 3 years ago, does not fit exactly but looks OK.
http://www.snydersantiqueauto.com/2493
Snyders and Berts still show the rubber mat on there web sights, are they saying they no longer supply them?, I got mine about 3 years ago, does not fit exactly but looks OK.
http://www.snydersantiqueauto.com/2493
- January 21st, 2013, 1:36 pm
- Forum: AA Ford Discussion
- Topic: RUSTY WET LOOK
- Replies: 8
- Views: 4569
RUSTY WET LOOK
I have seen that some Double Aers have kept there trucks with the wet rusty look, I have this drum that my son found which as added to all the other farm display stuff we have accumulated, I wanted to have it powder coated, my son and a few friends have said it should stay naturally rusty. So my que...