aa-fords.com

Having to spend a month working in my units tire shop in Viet Nam I learned one very important thing. Always be on the inside of a split rim wheel when airing it. If the ring decides to take flight is is going away from you.

It looks like all you will have to do is remove the splash apron on the drivers side to find your serial number as the body is missing in that area.

The radiator shell and headlights are from a car, not a commercial vehicle. I see the cowl also has holes for cowl lights, also indicating it if from a car. It does have a mixture of '30 and '31 rims. From the heavy axles it is a late '30 or 1931. The fenders with two piece splash apron say 1930. As...

Got a lathe?

Water-less coolant means no rust.

You show an ad selling them and ask where to find one?

'30 and '31 are different. What year do you want? I have them but shipping will kill you.

The '30/'31 High Speed units had a brass tag. Some with a number and others without.

It may be to show the gear ratio has been changed from what is stamped on the housing.. So you will have to check the ratio. Can do via counting drive shaft rotations to wheel rotation. Be sure to keep the tag!!! Or, if the speedometer is accurate, look at the ratio stamped on the speedo drive gear.

Bob C wrote: ↑

January 3rd, 2021, 12:30 pm

If the gears are that rusty the bearing probably aren't much better. I would pull the
trans and disassemble it. You might get more response if you put this in the discussion forum.

Discussion forum????

Remove the lid from it. Disassemble, clean, reassemble.

What do you mean not sealed? Here is an article about Evans being used in a 1930 Model A cross country record-breaking drive, NY to California (50 hours). https://secure.performanceracing.com/news/ocean-ocean-world-record-set I read the article. No where does it say if it was a sealed or open syste...

Evans doesn't recommend using their coolant on systems that are not sealed.

Give Sammy a call at Arizona Model A. 480 782 0266

There were some made a few years ago. I think its time for a new batch to be run. I'll buy a set.