Search found 3062 matches
- July 8th, 2008, 8:10 am
- Forum: AA Ford Discussion
- Topic: 1929 Express info
- Replies: 7
- Views: 5175
Re: 1929 Express info
Yes, the small wheel wells identifies it as an 89-A express! A picture of the outside above the rear fender would identify an early '28 or later 89-A express. The TT express has no wheel wells and were not designed to rest on the tapered AA frame. The skid strips must be replacements. The originals ...
- July 7th, 2008, 8:13 am
- Forum: AA Ford Discussion
- Topic: 1929 Express info
- Replies: 7
- Views: 5175
Re: 1929 Express info
Hello Roy, Based on the 1929, six vent hole wheels, your truck is a 1929. The 1928 (through Jan. 1929) had steel spoke wheels. The '30/'31 wheels are five vent holes. The 1929 wheels will not fit properly onto a '30/'31. The '28/'29's have a worm drive rear axle. The 82-A closed cab was used through...
- July 3rd, 2008, 6:32 am
- Forum: AA Buy and Sell
- Topic: New guy needs direction and advice!
- Replies: 2
- Views: 2981
Re: New guy needs direction and advice!
Hello Dennis, The 1930 and early 1931 wheels do not have the reinforcement stamped into the face of the hub (around the lug bolt holes). The Model A Judging Standards has a good description of the wheel changes for ‘30/’31. A description of the wheel flange (lock ring) is also provided. The 1932 Exp...
- June 27th, 2008, 7:40 am
- Forum: AA Ford Discussion
- Topic: Install wheel ?
- Replies: 5
- Views: 3367
Re: Install wheel ?
Yes, the safest way to get the tires mounted is to get someone else to do the job. If it is being done at home, then I like the idea of a remote method of inflating the tire. I will have to get some parts which will allow this to be done. I would recommend inflating the tire in stages. I have found ...
- June 24th, 2008, 9:53 am
- Forum: AA Ford Discussion
- Topic: Install wheel ?
- Replies: 5
- Views: 3367
Re: Install wheel ?
You might try using some duck tape on the wheel where the flange if being installed. And protect the cadmium plated flange as well. The grove in the wheel, for accepting the flange, must be clear of all rust build up as well as the edge of the flange which fits into the grove. Also, the wheel rim su...
- June 24th, 2008, 9:32 am
- Forum: AA Ford Discussion
- Topic: AA serial number on frame where to look ?
- Replies: 7
- Views: 3735
Re: AA serial number on frame where to look ?
Here is a picture of the original engine number stamping on the frame. Post a picture of what you have for rear springs and maybe someone can help.
- June 17th, 2008, 7:22 am
- Forum: AA Ford Discussion
- Topic: AA MEETING IN DALLAS??
- Replies: 3
- Views: 3289
Re: AA MEETING IN DALLAS??
I was contacted by Ron Kelley regarding AA mirror brackets. And, Ron said that he was responsible for the an AA truck meeting at the Dallas meet. This was June 3rd and was the first that I had heard about the meeting. Anyway, it sounds like there is a meeting which was set up by someone - and thanks...
- June 15th, 2008, 6:47 pm
- Forum: AA Ford Discussion
- Topic: AA Disc Wheels to AA Wire Wheels
- Replies: 29
- Views: 14567
Re: AA Disc Wheels to AA Wire Wheels
I have never seen any Ford documentation stating that obsoleted part were used up on the commercial A's and AA's. However, there is lots of information regarding the change over from the '28/'30 82-A closed cab to the '30/'31 82-B closed cab.
I don't have any information regarding non USA units.
I don't have any information regarding non USA units.
- June 14th, 2008, 6:28 am
- Forum: AA Ford Discussion
- Topic: Bolts
- Replies: 2
- Views: 2064
Re: Bolts
I can not think of any square bolts/nuts with regards to the rear axle and springs. It could be that they are replacements as a result of service over the years. I also don't know of any parts diagrams. The Ford Parts Price Lists is a good source for pictures of parts and lists of the standard parts...
- June 11th, 2008, 7:45 am
- Forum: AA Buy and Sell
- Topic: WANTED: AA Long running boards 69 3/4 inches
- Replies: 1
- Views: 2567
Re: WANTED: AA Long running boards 69 3/4 inches
Hello Don,
I currently have three '29 AA long boards to sell. They are $80 each plus shipping. They all need some repair. I can send you pictures showing the damage if you want. Just send me an e-mail.
I currently have three '29 AA long boards to sell. They are $80 each plus shipping. They all need some repair. I can send you pictures showing the damage if you want. Just send me an e-mail.
- June 9th, 2008, 8:41 am
- Forum: AA Ford Discussion
- Topic: eBay AA
- Replies: 3
- Views: 2536
Re: eBay AA
I see that the truck cab has the high rear window. I can not tell if there is a Ford script above the rear window but I can't see one. So, this truck would most likely be in the April to June 1928 range.
If you have some high resolution pictures of the truck, please send them to me via e-mail.
If you have some high resolution pictures of the truck, please send them to me via e-mail.
- June 5th, 2008, 5:57 pm
- Forum: AA Ford Discussion
- Topic: AA Title
- Replies: 1
- Views: 2034
Re: AA Title
RLaurin,
Send me an e-mail and I will give you the information I have for getting a title.
Send me an e-mail and I will give you the information I have for getting a title.
- June 2nd, 2008, 8:35 pm
- Forum: AA Ford Discussion
- Topic: Small update with some pics.
- Replies: 10
- Views: 6088
Re: Small update with some pics.
1928 and 1929 AA Front End Part Identification For 1928 and 1929, the AA front end was largely an assembly of A parts. Those parts which were AA specific are listed below. AA Front End Parts (prior to February 15th 1929) (2) AA-1105 – Front hub and brake drum assembly (all right hand threaded wheel ...
- June 2nd, 2008, 7:47 am
- Forum: AA Ford Discussion
- Topic: Help ID'ing Hole
- Replies: 1
- Views: 1941
Re: Help ID'ing Hole
A picture is worth 1,000 words! But, it sounds like you have some aftermarket holes.
- June 1st, 2008, 2:24 pm
- Forum: AA Ford Discussion
- Topic: seat bottom upholstery
- Replies: 8
- Views: 3990
Re: seat bottom upholstery
The extensions on the bottom of the spring fit on the outside edge of the tabs in the heal kick. This keeps the seat from moving side to side or forward.