Search found 56 matches
- February 9th, 2018, 6:59 pm
- Forum: AA Ford Discussion
- Topic: Looking for some advice on AA trucks
- Replies: 32
- Views: 22418
Re: Looking for some advice on AA trucks
Hi there, I’ve read your posts and it kinda sounds like you have a good idea of the “style” of pickup you want, as mentioned above, these trucks were work trucks, so as such, they were worked like dirt mules until they were wore right out- Spring bushings, king pins, steering. So when folks say they...
- February 9th, 2018, 11:43 am
- Forum: AA Ford Discussion
- Topic: Canadian Timken differential
- Replies: 18
- Views: 19862
Re: Canadian Timken differential
Pinion gear has 5 teeth, ring gear has 31 on the BC diff, part number on the pinion is 33589, and 33838 on the ring gear https://uploads.tapatalk-cdn.com/20180209/f388d96535803f0bb8bfb36a225259f6.jpg The gear set out of the truck as well as the parts truck both are 5-34 ratio and part number H1062 o...
- February 8th, 2018, 7:36 pm
- Forum: AA Ford Discussion
- Topic: Canadian Timken differential
- Replies: 18
- Views: 19862
Re: Canadian Timken differential
Since they had an open driveshaft how were they connected to the frame? just the leaf springs like modern trucks? I see a pretty stout bar that has been torched off in your pic... I am pretty sure it connects the same way any other AA diff did, two 1” pins through the back of each leaf spring to th...
- February 7th, 2018, 7:06 pm
- Forum: AA Ford Discussion
- Topic: Canadian Timken differential
- Replies: 18
- Views: 19862
Canadian Timken differential
marcel kristoff wrote:Wow. I’m only 45 mins away from Dawson Creek. My AA has the same rear end. Can I ask who you bought it from?
PM’d you
And yes Stakebed, they have an open drive shaft
- February 6th, 2018, 10:38 am
- Forum: AA Ford Discussion
- Topic: Canadian Timken differential
- Replies: 18
- Views: 19862
Canadian Timken differential
Hi guys, I’ve been getting some work done to the AA since it went sub zero here the last few months, rebuilding the front and rear suspension and the steering but I finally tracked down a diff for my AA out in Dawson Creek BC, so I made the trip last weekend (1700 km one way) as well as a proper cab...
- January 23rd, 2018, 4:09 pm
- Forum: AA Buy and Sell
- Topic: 3/8 rivets
- Replies: 0
- Views: 18162
3/8 rivets
I have a box of 3/8 by 1” rivets, these are used to rivet the rear suspension brackets to the frame. If anyone needs some, I’d like $4 CAD plus shipping for 12 , I have enough to make around 4 packs of a dozen each , thanks. Pm me your address and email info if you’re interested, thanks
- December 22nd, 2017, 6:23 pm
- Forum: AA Ford Discussion
- Topic: Front radius rods question
- Replies: 9
- Views: 6786
Re: Front radius rods question
While mixing and matching front end parts you should be aware that there are a number of different spindles, bearings, and hubs for these 28 & 29 trucks. If I remember correctly, my Oct 28 had some of these parts on it that the Service Bulletins said should be replaced (free) at the next dealer...
- December 16th, 2017, 2:57 pm
- Forum: AA Ford Discussion
- Topic: Front radius rods question
- Replies: 9
- Views: 6786
Re: Front radius rods question
I took apart my parts truck front end, salvaged the front spindles and wish bone I need, but it’s axel is bent worse than the original so I’ll see what I can do with it in the press in the next few days, I straightened my other A’s axel easily so I’ll try this one. Then to rebuild the radius ball, s...
- December 16th, 2017, 5:40 am
- Forum: AA Ford Discussion
- Topic: Front radius rods question
- Replies: 9
- Views: 6786
Re: Front radius rods question
Thanks for the offer, but I should have a spare in the back, I’ll let you know if I need one. Thanks again, Merry Christmas!s147881 wrote:I have several wishbone and axles if you are in need of a replacement
- December 14th, 2017, 6:35 pm
- Forum: AA Ford Discussion
- Topic: Front radius rods question
- Replies: 9
- Views: 6786
Re: Front radius rods question
Ouch. Yes I believe that they are the same. With damage like that I would be looking really hard at the axle to make sure it is straight. The axels bent beyond repair, and the spring perches are wore out, I am at the point of just getting the whole axel assembly off my parts truck and starting to r...
- December 14th, 2017, 5:00 pm
- Forum: AA Ford Discussion
- Topic: Front radius rods question
- Replies: 9
- Views: 6786
Front radius rods question
There’s no difference in the 1928 AA radius rods or front axel between an A and an AA right? Just the spindles are different between the two models. And next question, tho I’m pretty sure i know the answer, the radius rods are supposed to be straight , not bent https://uploads.tapatalk-cdn.com/20171...
- October 14th, 2017, 9:38 am
- Forum: AA Ford Discussion
- Topic: Canadian AA fire truck
- Replies: 5
- Views: 5243
- October 14th, 2017, 9:37 am
- Forum: AA Ford Discussion
- Topic: Canadian AA fire truck
- Replies: 5
- Views: 5243
Re: Canadian AA fire truck
This time we’re at the Western Development Museum in Moosejaw Saskatchewan. No AA’s but lots of trucks,cars, n railroad IMG]https://uploads.tapatalk-cdn.com/20171014/160f8c595299af1026737f54557c535c.jpg[/IMG] https://uploads.tapatalk-cdn.com/20171014/148c40177ddbddba79fc37a2f9b1558a.jpg https://uplo...
- August 9th, 2017, 12:20 pm
- Forum: AA Ford Discussion
- Topic: Canadian AA fire truck
- Replies: 5
- Views: 5243
Canadian AA fire truck
Just posting some pics of a nice Canadian AA fire truck at the train museum in Winnipeg, Manitoba, my kids were too interested in the trains to worry about an old fire truck [emoji849] but I grabbed some pics and thought I'd share https://uploads.tapatalk-cdn.com/20170809/1e359078e1688138fac471ee995...
- June 30th, 2017, 8:26 pm
- Forum: AA Ford Discussion
- Topic: Newbie AA
- Replies: 40
- Views: 42447
Re: Newbie AA
it's a 30-31 worm drive. '30/'31 used the Split Case Timken. Not a Worm Drive.[/quote Sorry, it's the first one I've seen, I saw the split case but thought the configuration looked like a worm drive, I identified the truck as a 30-31 by the fenders, wheels etc. Sent from my iPhone using Tapatalk