aa-fords.com

i guess this is officially called |WINDOW TRIM SLIDE . does anyone know of a vendor? thank you, kevin

thank you for photos. i am installing mine as we speak. it does seem that the glass is a bit too thick combined with the rubber gasket. it makes the side bolts in the frame not line up. i think i saw a post once that most of the glass sold is quarter inch when it should be 3-16th of an inch. have yo...

well, now that makes sense. i assumed that since it came with 2 frames, two were used. i should never assume. thank you, kevin.

looking for both doors, front and back, the metal strip that the 3 sided molding slides down over. proper name? vendors with this part? thank you, kevin

thank you mac. is your window put together the way i listed it. sandwiched between two frames? or is there a frame on the outside? seems that the bolt threads would show from side because of the raised panel?

thank you for info. it seems like it is sandwiched together as follows, frame , glass , frame, back of cab. is this the order with the gasket around the glass and the screw heads inside and the nuts outside, most likely square or hex?

my truck came to me in pieces, so lots of confusion, bolts in bags etc. all unlabeled. my 28 rear window. i have the two frames, glass and gasket. what is the proper nut on bolt? square, hex? and how is it sandwiched together starting from the inside. any photos appreciated. thank you, kevin

my truck came to me in pieces, so lots of confusion, bolts in bags etc. all unlabeled. my 28 rear window. i have the two frames, glass and gasket. what is the proper nut on bolt? square, hex? and how is it sandwiched together starting from the inside. any photos appreciated. thank you, kevin

thank you neil for great info. another question: do you have any ideas on riveting hood handles with simple tools? how do you support hood without damaging it? hope all is well. kevin

did you do it with a hammer and punch? how did you support hood while setting rivets?

i have a 28 AA. when the wooden slats for the seat are bolted to back of cab, what is seen on the outside? the bolt head or the nut. is it a square nut? also. when it comes to riveting handles on hoods, leather on hood corners etc. can this be done with a punch and a block of wood. not sure if an ai...

neil, i clicked on link and it would not open? not sure if the problem is on my end? did you have any ideas about the clamps? are they bolted independent of the perimeter bolts? or do they use the same holes? hope all is well. kevin

i ordered a brake switch that bolts on transmission cover. seems to be made for a 3 speed. my truck has an updated 4 speed. what do people use with 4 speeds? also question number two. the clamps that hold cowl and gas tank together, are they used with the existing bolts and nuts OR are they spaced i...

i welded extra square stock on. all set now. upon finer scrutiny i could see it had been cut. thank you for ideas, kevin

i believe model T had the same door? same cab back?