aa-fords.com

Thought I would show off a few pics of a recent tour with my club the Palomar As 19 Oct, we went to the Vista antique gas and steam engine museum, a must visit for anyone coming to the San Diego area, here is the link ---- http://agsem.com/ ---- . The open 30 as been this way for a long time, the ow...

Just cleaned out my parts stash and founds some odds and ends to sell, $83 mailed for all, here is a list. 2. 30-31 water outlets, resurfaced and painted. 1 Water inlet, small pits filled and resurfaced 2 distributor bodies, checked for correct fit on my distributor and test driven. 1 used rotor. 1 ...

could use one for my 29 dual high The floor mat I have in my 29 is the same as the model A, you will have to cut the holes for the high- low pedal, The only thing I noticed was the mat retainer holes come up short, maybe the commercial cabs have other dimensions This pic is from Bert's in Denver, a...

Hello Trevor, Do you have a copy of the green bible?, I looked and found 3 that have that shape 28 thru 37, there are no dimensions listed, there are more in the 28 thru 48 section, best bet is to measure them show bolt hole spacing etc and post them on Fordbarn swap meet, somebody may want them, he...

Brian T wrote:This is another set of 29-31 AA king pins not as complete as the other set that are now sold, but by the same manufacturer, I am asking $60 + $5-80 usps.
Thanks Brian T.

RELISTING.

I have recently had a long chat with a fellow AAer who purchased some parts from me, he is finally restoring a 30 131-WB he as had for 50 years that was a dump truck, he is in need of the 2 front rail horns and the pieces that were cut of when converted to a dump, if any one has an old frame that is...

If I remember correctly the purpose built hearse (non Ford body) had the Lincoln wheels and different hubs, and a few other changes, see page 15 of the double AAer 2010.

Getting back to my original question. Is their a automatic wiper that can be used on a '29 without butchery? Here is something useful that may answer your question, I thought of fitting a vacuum wiper to my 29, they go along with all the other must do work that makes driving a double A fun,?. Here ...

I have these Budd wheel nuts which are surplus to my needs, 5 inner R/H-4 outer L/H-1 front R/H, I am asking $25.80 including mailing, ---- in addition I have-(not shown) mostly unused, 5-L/H 29 acorn nuts and 5-R/H for an additional $20 shipped with the above.
Thanks for looking, Brian T.

Here is a link to a post I made on Fordbarn regarding the splash pan bolts that were still on my May 29, it may shed some light on the subject.
http://www.fordbarn.com/forum/showthrea ... +pan+bolts

OK --- now you mentioned the truck came from he UK I now know who it belonged to, the owner was a member here who went by the name of AV8, who got the truck from the UK and owned it for a couple of years. Here is the link to one of his posts, and a pic of it at a US airfield show, the only thing I s...

The number pad looks to rough to have had an old number ground off, the pitting appears the same as the block, the number range is in the late 29s but the truck is a late 30 possibly 31, as it is in Romania could it be a GAZ?.

Hello Dave, I am thinking model TT, if so the ring gear should be narrower than the AA, the carrier bearing appears to be ball bearing, and the thrust bearing looks like the TT axle, I posted a breakdown of the TT axle some time back, I am out of the country and do not have it on this PC. As you may...

The AA stamp is found on both the car and truck axles and defines the steel quality make up, there can be other markings, it can also be found on other forgings.

Marty,
If you leave the venturi in place you will find the bowl gasket will not fit, if you have to destroy it to remove it, they are reasonably cheap to buy.