Search found 281 matches
- February 8th, 2020, 9:37 pm
- Forum: AA Ford Discussion
- Topic: Play in Rear Spring Seat Assembly
- Replies: 8
- Views: 7715
Re: Play in Rear Spring Seat Assembly
Keep in mind all the weight of the rear of the truck will wear the top clamp and top of the axle. I found a couple better fitting ones but still needed to build a couple areas up with weld and filed down to fit tighter. if there is still excessive play you can file the flats of the clamps down a bi...
- November 25th, 2019, 7:27 pm
- Forum: AA Ford Discussion
- Topic: Brake rod question?
- Replies: 3
- Views: 3725
Re: Brake rod question?
The AA brake pins are the same as model A pins
- November 10th, 2019, 7:32 pm
- Forum: AA Ford Discussion
- Topic: Pinion Flange Seal (option)
- Replies: 1
- Views: 2755
Re: Pinion Flange Seal (option)
Thanks for posting this, i explored the possibility of replacing the cork seal with an o ring on my pinion but didn't have any luck finding one let alone the ring and sure enough it leaks, I'll be prepared the next time
- November 2nd, 2019, 9:26 pm
- Forum: AA Ford Discussion
- Topic: Truck progress photos
- Replies: 58
- Views: 61069
Re: Truck progress photos
Stunning! I can't wait to see more
- November 2nd, 2019, 9:11 pm
- Forum: AA Ford Discussion
- Topic: Clutch Heaven
- Replies: 7
- Views: 7527
Re: Clutch Heaven
I am using the V8 clutch disc and pressure plate. Smoother and stronger. I've heard good things about those V8 clutches, is any kind of a modification necessary to install one? I had a sedan with an original clutch plate, no doubt relined at some point, it was somewhat unforgiving, a little too res...
- October 31st, 2019, 9:20 pm
- Forum: AA Ford Discussion
- Topic: Clutch Heaven
- Replies: 7
- Views: 7527
Re: Clutch Heaven
Thats engaging, would you be willing to share your source for the clutch disk material? I gave up trying to locate a disk with AA specs and installed the A model disk.
- October 25th, 2019, 6:15 pm
- Forum: AA Ford Discussion
- Topic: AA brake pedal details compared to Model A
- Replies: 4
- Views: 3932
Re: AA brake pedal details compared to Model A
I've got 2 available if anyone's interested
- October 24th, 2019, 9:02 pm
- Forum: AA Ford Discussion
- Topic: AA brake pedal details compared to Model A
- Replies: 4
- Views: 3932
Re: AA brake pedal details compared to Model A
this is one photograph of a AA brake pedal next to a clutch pedal and one more by it's self, i could not find a trace of a part number on this one but the one I have in the truck does have a AA part number.
- October 23rd, 2019, 6:52 pm
- Forum: AA Ford Discussion
- Topic: mystery number
- Replies: 4
- Views: 4070
Re: mystery number
From the MARC web sight MODEL A FORD ASSEMBLY PLANTS AND BODY NUMBERS by Dave Sturges Glenwood, Maryland I have undertaken a research project to identify the Model A Ford Assembly Plants and their corresponding ID number codes that were stamped onto the bodies of some Model A’s. This Assembly Plant ...
- October 22nd, 2019, 7:59 pm
- Forum: AA Ford Discussion
- Topic: mystery number
- Replies: 4
- Views: 4070
Re: mystery number
It is the body number. Tells you where it was made. Sorry I don't know the code.How about that, thanks guys,TC is for Twin City. That is, St. Paul, MN
- October 21st, 2019, 9:05 pm
- Forum: AA Ford Discussion
- Topic: mystery number
- Replies: 4
- Views: 4070
mystery number
Can anyone tell me what this number is stamped on the middle crossmember on the drivers side?
- October 12th, 2019, 9:18 pm
- Forum: AA Ford Discussion
- Topic: King pins
- Replies: 3
- Views: 3241
Re: King pins
Just curious, anyone know why A has thrust bearing on top and AA on bottom? Old one ton Chevys and GMCs I used to work on had them on bottom like AA. (Sorry not a very good picture) Good question, pretty sure they can be installed either on top or on the bottom (I think I've done both) but as you s...
- October 7th, 2019, 9:39 pm
- Forum: AA Ford Discussion
- Topic: Spring Bushings
- Replies: 20
- Views: 25838
Re: Spring Bushings
Filing by hand seems like it would be almost impossible to get it completely round again. Any info the tool or where the picture came from? Searching Perch tool does not result in anything useful that I found. The picture came from this web sight, I think the tool changed hands over this sight, I w...
- October 7th, 2019, 7:14 pm
- Forum: AA Ford Discussion
- Topic: Spring Bushings
- Replies: 20
- Views: 25838
Re: Spring Bushings
I welded mine over head and filed them, not as easy as welding them inverted but I didn't have to take the truck apart to do it. You could remove them and have a machine shop bring them back to spec then bolt them back on with high grade bolts, getting them off is a challlenge. perch tool.jpg or you...
- October 2nd, 2019, 6:01 pm
- Forum: AA Ford Discussion
- Topic: Steering wheel, and a name
- Replies: 3
- Views: 3985
Re: Steering wheel, and a name
Talk about provenance, that's great, nice technique with the hone too, thanks for sharing those.