aa-fords.com

mabye a steering stop

causes, is there a castor or camber on a ford model A. new king pins 10k ago. denman tires. any advice?

i have the bed sides and headboard and tail gate. need to be remade from wheel wells down. in ct

i have an express bed for sale and a rear driver fender NOS. the bed needs to be remade from wheel wells down. it is possible, i did the same on my truck. fabricating with a sheetmetal shop and lots of tig welding and grinding, can send photos of bed and my current truck, in ct.

my starter spins fine on bench, when installed makes a hammer noise when engaging. maybe too much end play in shaft, moves aobut3/16 inch. i put on new bendix, do they ever need to be shimmed out, how much play is normal. any idea?

how does one do this on a AA. my tire is wearing slightly heavy on the outside after about 5k miles. only one side. new king pins. inflation kept up.

i brought my panels to a sheet metal shop in ct. i paid 3200 and had all rotted areas remade and butt welded with no bondo. they also remade headboard and the rear "U" style crossmember that wraps tailgate. my bed was rotted out from bottom wheel wells down. i have similar for sale, rot as...

thank you all for great input. i am thinking i have the car spindle stops and not the AA. very small difference but quite important. any idea for sources of this part? i looked at snyders but no luck, maybe looked under wrong title.

if i make a sharp right hand turn the wheel goes too far and can start to skid. i see no steering stops. any advice. only happens under the perfect conditions but far from ideal. have denman 20 inch tires.

the fuse does not protect the starter, if a brake pedal hangs up, power can be drawn down. i like to have all power cut off in an old barn with lots of autos,mice etc.i wish the fuse was between the battery and starter.

best style, best spot to mount? any ideas or photos. thank you.

i think snyders has them. if not south shore bearing in mass. ask for steve, you send him yours, he matches them up. nice honest man.

does anyone know of a source for black wall tires? need a good spare, might just have to buy a lucas or goodyear, anyone have good used?

the photos seem to show petcocks on intake? to prime engine? not sure why this was needed? any ideas?