aa-fords.com

Hi,

i want to buy a set of 28/29 door wood brackets for a pickup, they are the metal brackets at the bottom and rear of the seat frame which hold the door post wood upright.

Thanks, sunny

Hi,
looking for a set of door wood brackets, they attach at the back of the seat frame on bottom, and hold the door post wood upright.
Thanks

get a 30 ton hydraullic press, worked on my A

Thanks Flatford

Any advise on what to do with a 30/31 HD truck radiator with 2 leaks one minor and 1 major? scrap it, recore?, there 825. new, and 600. to recore.

i have 1929 AA truck transmission
came attached to an engine i bought
the engine is rebuilt
it is possible the tranny was rebuilt at the same time.
make reasonable offer.
Thanks

will send photos, if you include your email

Brian,

Thanks for the photos of the radiator, yes i would like phone #

Thanks, sunny

i need a 28/29 radiator and shell, i have a 30/31 AA radiator and shell, but my truck is 29. i will consider trades or what. a 28/29 car radiator and shell would be fine, as i will not be hauling loads or driving it much.

Thanks, sunny

would like to trade my 30/31 radiator shell H/D for 1 28/29 radiator shell

Thanks

Thank You, for all the help, i plan to have a machine shop bore them, the consensus here is overwhelming.

Thanks, what about a ridge at the top .015, can i ream it and put the same pistons, and new rings back in?

i would like to explore cylinder boring techniques using a drillpress as power source, and some type of adaptable boring heads, any suggestions.
Thanks, sunny

Hello,
i would like to trade my 30/31 AA radiator/shell for 28/29 AA radiator/shell.
Thanks,sunny

for what it's worth; i have an engine w/ LB and a 4 digit number which follows, my mentor told me it's a Long Beach Calif. rebuild.
sunny

Thanks for the replies.
this material can be found here: http://www.professionalplastics.com/PHE ... NVASCSHEET,

and here is where you can buy the rivets: http://www.hansonrivet.com/w02.htm