aa-fords.com

I sounds like you have replaced the clutch/brake pedal shaft that goes into the transmission with a car shaft Bud Valerius

You have a 195-A express body there is a article on that body style in The Double A'er 2005 news letter .You might be able to purchase a copy if you contact Neil Wilson .You should join the club if you haven't .There is a welth of information in the yearly news letter . Neil and I both have complete...

I was once told that the 32 fender well is the same as the AA

The left front fender spare tire carrier for the AA's came out in 1931

The door for the left side fender spare wheel trucks have a indent in the door to allow thye door to open wide enough to get into the truck , the panel van type trucks have a different shape indent . This is a photo of the one on my dump truck . Neil Wilson added the measurements to the photo .

I have a vacuum assist for mechanical brakes , it's frame mounting bracket is 37" long .It is mounted on a piece of plywood and labeled as a vacuum brake assembly for mechanical brakes. Bud Valerius

Your problem happens often , I have run across it several times , You can use a cut off wheel & a punch . It isn't easy but if you take your time it can be done Bud Valerius

To use this set up you will need the the AA 7085 B rear transmission bearing retainer , I didn't see this listed in this ebay sale. Bud Valerius

I have some NOS wheel studs ,I will need the measurements & right or left threads so I can check the ones that I have. Bud Valerius

I'm in Manhattan Kansas and have several AA's that you could look at , 785-776-3532 home 785-539-6650 work , I'm at the work number most every day 7AM to 5 PM .Bud Valerius

The 29 tooth ring only mates with the 4 tooth worm gear which makes that one being a 7.25 ( not desireable ) you should be looking for a 31 tooth ring gear and a 6 tooth worm which gives you a 5.16 high speed gear

Post the date of the wheels that you are looking for , the month & year are stamped on the inside of the Budd wheels . I might have what you need . Bud Valerius

Wanted 1931 left running board for a 195-A with dual wheels part # AA-16509 Bud Valerius 785-539-6650 wk , home 785-776-3532

Service bulletin ( Fig.#802 ) December 1929 only one zerk fitting in the drive shaft housing to lube the u-joint (8 oz grease ) grease every 500 miles. I wouldn't put one in the clam shell . November 1930 Service bulletin (fig. #1029 ) fitting added when changing to the new style bearing & sleve...

It looks like you have added zerks where they shouldn't be . If you are trying to get more grease to the u-joint you might trying to add them to the two piece clam shell cover . Where you put them will cause you problems that u-jount needs to go in all the way. Bud