aa-fords.com

no cutting, it looks perfect. it is actually more like 1-1/2 plus short. i am confused? what other application would take this with a shorter shaft?

i found two original door handles on here about 2 years ago. good bakelite in middle. as i slide them into my 28 AA door, they are about 1 inch short of going into the square hole in the latch mechanism. in essence, the square shaft is short. was there an intermediate shaft from factory with coupler...

hey fit very nice. top quality, excellent people to deal with. hope this helps. kevin

thank you neil, i was hoping used would look worn and not bright and shiny. i have not seen any offered in nickel. hopefully i will find some used nickel. are they hard to come by?

need both sides and horn. any help appreciated. kevin

thank you for info. i interpreted this as my truck had black conduit. i referenced this quote to a vendor in CO and he referenced his JS book and said i read it wrong? so i guess my idea that black was used is wrong. any other ideas from people? the vendor in CO is well read on the topic, he said 28...

did AA ever use chrome conduit. i thought every year had the black conduit. i have heard some people say that early on the chrome was used. any ideas. i want to have the correct ones for my late 28AA. thank you.

i have a 31 model a 2 door sedan. new radiator. i loose some coolant from steaming. not boiling. if i go 100 miles at 40-45 i loose about a gallon. is this excessive? maybe timing is not advanced enough? might be running a bit hot. any ideas. local drive short distance not a problem. just long runs ...

i also should have mentioned: the wrap around bracket screws into the top cab wood. this is the area above rear window. the sheet metal seems to snap in UNDER the bracket. i see half moon notches in sheetmetal for each wood screw head holding in bracket. it seems that the sheetmetal above window wou...

i am installing the rear sheetmetal on my wooden frame. question? i see small holes in sheetmetal where it is nailed to door jambs. I see carriage bolt head at top of door jamb which bolts in steel bracket running along top of back wall. is there any other way that the steel above rear window is hoo...

even inside photos of wheel wells would help if wood is removed? thank you, kevin

how bad is rot on bottom? do you have any photos? thank you, kevin

i still have one more question. if you shut either side door, you will notice it butts up to a small lip about 3/16". this is the edge that i speak of. does your moulding butt up to the edge or come over it and then be peaned over. i have seen both. hope you can visualize. thanks again, kevin

so just to be sure, you could remove your trim piece by removing 2 screws. it is not formed, peaned over or bent over the little raised edge in the side door opening? thanks again, please inform. kevin

that is the part. the edge of it that lays next to the door is the edge in question. some butt up to the edge in the door frame. some ride over the door edge and are peaned over 1/8 inch. i have seen both. which is correct? any ideas or photos of your cabs?