aa-fords.com

wouldn't a steel washtub be the perfect size? like they use for redneck upright basses? i know you can get them at farm stores, although i don't know for how much. i seem to remember home depot has them, too, but don't take my word on that. i've been contemplating the best way to degrease the brake ...

dan, if you're NOT running an oil filter, you use SAE 30 oil in the engine. it's non-detergent. i got mine at a farm implement store. you would only use detergent oil (examples: 5w/30, 10w/30) if you were running an aftermarket oil filter. the straight 30 oil works best because it traps all the impu...

After a fair number of old tow trucks, ranch trucks and 4x4's the PTO handle on older trucks was not a thing of beauty. Most of them were simply a piece 1/4 or 3/8" x 1 1/4" flat stock rounded off at the top. if you wanted to be fancy you ground it down and either threaded a ball onto it,...

Here is a picture of mine. :D cool! could you email me a bigger version so i can see the nooks and crannies of the operation? pyrodork at yahoo or is there someway to enlarge the photos posted here? i haven't found a way, myself. Right click on the picture. Select "copy" Right click on yo...

spdway1 wrote:Here is a picture of mine.

cool!
could you email me a bigger version so i can see the nooks and crannies of the operation? pyrodork at yahoo

or is there someway to enlarge the photos posted here? i haven't found a way, myself.

like the title says, i want a handle for my PTO.

i made one, but i want the real deal... or at least a detailed photograph. there seems to be a shortage of PTO handle information aside from "a flat bar with a bend in it".

PTO accessories? tell me what you have, but pics would be better!

spectria wrote:

pyrodork wrote:i'm looking for a PTO handle, fyi.

pyrodork, start a thread in Wanted, it will get more attention.

I need that handle for 2!

i like the way you think, dave!

how to repair small holes in budd wheels?

best way to cut out budd centers to use in modern semi wheels? best way to mount? mount straight?!?!


...or is this something i should just let a pro shop take care of?

like!

why isn't there a "like" button for forums?

rollingsculpture, could you make one with the PTO cutout? still $20?

i just poured about a gallon of evaporust in the trans case; just over the gear shaft, let it sit several days, scrubbed, drained, rinsed, prybar, 600w oil... there's no pitting and everything moves. now i just need to get the tower to move the gears along the shaft. i think once i get all those box...

i'm looking for a PTO handle, fyi.

neat! is it on the raised face side or the sunken face side?



let's see if my diagram is clearer than my explanation...

(raised face)
_/ \_
(sunken face)

i suppose the hole was just sealed over. and hey, if it ever ran dry, there's a good something to get you going a lil further! ...and not necessarily down the road!

spectria wrote:I just brought home a 1930 truck with 6 wheels, I'll check the dates and if any are late I will measure them up for you.

there's dates on the wheels?