Search found 179 matches
- November 5th, 2021, 8:17 am
- Forum: AA Buy and Sell
- Topic: 28-29 Dual High
- Replies: 2
- Views: 26216
28-29 Dual High
I have a complete dual high set up out of a late 28 truck. It has the kick down pedal, bracket, oil fill tube and rear hanger plate. The truck had very low mileage on it. Price is$150.00 for everything plus shipping and crating. This unit is heavy and will require a wooden small crate to be made. On...
- November 5th, 2021, 8:14 am
- Forum: AA Buy and Sell
- Topic: Cleaning out our stash
- Replies: 16
- Views: 42123
Re: Cleaning out our stash
Hi, Looking for a 10-3/8" long 28-29 outside mirror arm. This bolts between the top and middle door hinge. It is a casting, I have the mirror head just need the arm.
Thanks
Charlie
Thanks
Charlie
- October 28th, 2021, 8:00 am
- Forum: AA Ford Discussion
- Topic: worm drive drive shaft
- Replies: 8
- Views: 18071
Re: worm drive drive shaft
Thanks, So basically this would work like the 30-31 bevel drive shaft and make life much easier putting the drive shaft assembly together. I am going to use lubriplate spo-288 for yellow gears in the rear end. That is what I read on this site as a recommendation. Thanks for the help. Is there any ad...
- October 20th, 2021, 8:12 am
- Forum: AA Ford Discussion
- Topic: Adjusting the back lash in a worm drive rear end
- Replies: 0
- Views: 99508
Adjusting the back lash in a worm drive rear end
Does anyone know if there is any info on any adjustments for the worm drive to the bronze gear. All seemed okay before I dismantled the rear end, just wonder if there are any suggestions for any back lash adjustments, or do you just put it back together and drive it. I haven't seen any real articles...
- October 18th, 2021, 4:04 pm
- Forum: AA Ford Discussion
- Topic: AA 4645-A and AA 4655-A bearing and race
- Replies: 1
- Views: 6281
AA 4645-A and AA 4655-A bearing and race
Does anyone have a location for these bearings and races either NOS or new. They are for the 28-29 AA worm drive torque tube. This is the bearing and race at the speedometer end. Any help would be great, thanks.
- October 17th, 2021, 10:48 am
- Forum: AA Buy and Sell
- Topic: AA 4645-A and AA 4655-A 28-29 Driveshaft bearing and race
- Replies: 1
- Views: 6093
AA 4645-A and AA 4655-A 28-29 Driveshaft bearing and race
Looking for a new set or NOS or somewhere I could buy a replacement if they are made. My race has a couple of light rust stains,( from truck sitting in one place for so long) and not sure if I should use it. It is out of the torque tube so I could replace the seal. Any help would be great.
Thanks
Thanks
- October 6th, 2021, 7:58 am
- Forum: AA Ford Discussion
- Topic: worm drive drive shaft
- Replies: 8
- Views: 18071
Re: worm drive drive shaft
Thanks, that is what I thought on the bronze gear.
Charlie
Charlie
- October 5th, 2021, 5:28 pm
- Forum: AA Ford Discussion
- Topic: worm drive drive shaft
- Replies: 8
- Views: 18071
worm drive drive shaft
Has anyone run into the problem with the worm and the drive shaft being riveted together at the splined collier? If so, any suggestions as to which rivet to remove so you can rebuild the grease retainer and large felt seal that go into the end of the torque tube. This has to come apart in order to r...
- September 30th, 2021, 9:00 am
- Forum: AA Ford Discussion
- Topic: How much oil for a worm drive rear end
- Replies: 1
- Views: 5413
How much oil for a worm drive rear end
Does anyone know how much oil you need for the worm drive rear end. I am assuming that a gallon of lubriplate is more than enough? Thanks, just want to make sure I have enough on hand.
- September 27th, 2021, 5:23 pm
- Forum: AA Ford Discussion
- Topic: Where to buy Lubriplate spo-288
- Replies: 2
- Views: 4667
Where to buy Lubriplate spo-288
Does anyone have a good source for purchasing the Lubriplate SPO-288 oil for the worm drive rear ends? Thanks
- September 26th, 2021, 8:17 am
- Forum: AA Ford Discussion
- Topic: Filling at Warford Transmission
- Replies: 1
- Views: 4082
Filling at Warford Transmission
Does anybody know how much 600W oil you should put into a rebuilt Warford? With the fill plug at the top it is hard to tell were the oil level is. Any help would be great. I figure at least a quart to a quart and a half.
Thanks
Thanks
- September 26th, 2021, 8:14 am
- Forum: AA Ford Discussion
- Topic: Filling a worm drive rear end
- Replies: 2
- Views: 5698
Filling a worm drive rear end
I know that you fill the bottom end of the differential case up to the filler plug, but what about the filler plug at the back of the worm itself? Should those bearings be packed with grease when doing final assembly? Do you pour the rear end oil in thru that plug. Any suggestions would be of great ...
- September 8th, 2021, 6:06 pm
- Forum: AA Buy and Sell
- Topic: 30-31 Steel AA radiator shell
- Replies: 0
- Views: 22651
30-31 Steel AA radiator shell
This is a real nice AA steel shell. It has been striped and is ready for paint. Photos upon request.
Price $150.00 plus shipping
Price $150.00 plus shipping
- September 6th, 2021, 8:04 am
- Forum: AA Buy and Sell
- Topic: 28-29 CC body parts Sold
- Replies: 0
- Views: 17869
28-29 CC body parts Sold
I have most of the cab, it has been blasted and primed. Will need work. Missing one door. Cab is completely apart. Includes a cowl, tank and windshield frame, etc. Have photos upon request. Can ship at your expense, or you can pickup.
Price is $600.00 plus shipping
Price is $600.00 plus shipping
- August 15th, 2021, 8:48 am
- Forum: AA Buy and Sell
- Topic: 29-29 worm drive rear end
- Replies: 1
- Views: 4889
29-29 worm drive rear end
I am overhauling the hi speed rear end in my 28 express. I split the cases and all the gears and bearings look real good. I believe the truck had very low mileage on it. I do have one small concern, when standing behind the rear end,( looking toward the transmission), if you look at ea. tooth of the...