are they not the same as for the 30 A ?
from bratton's catalog :
30-31 STAINLESS STEEL FRONT BUMPER BARS
For Year(s): 30-31
These bars are polished to a bright finish and will last forever. Two bars only. The backside is not polished.
Part #24340 30-31 STAINLESS STEEL... $ 315.00
Search found 36 matches
- April 29th, 2015, 1:53 pm
- Forum: AA Ford Discussion
- Topic: front 2 bar bumpers for 1930 aa
- Replies: 17
- Views: 9802
- February 18th, 2015, 1:37 pm
- Forum: AA Buy and Sell
- Topic: Bed strips here soon!
- Replies: 24
- Views: 16921
Re: Bed strips here soon!
Hello everyone. Good news! It is looking like the bed strips will be done a little sooner than expected. ETA, 3rd to 4th week of March. Pictures will be soon. The middle strips are done and the end strips will be soon to follow. Just wanted to pass along this info. The price when they are released ...
- November 23rd, 2014, 4:57 pm
- Forum: AA Ford Discussion
- Topic: Who'd be interested
- Replies: 22
- Views: 12991
Re: Who'd be interested
I would be interested in a set. early 29 cab and chassis, with openings for a 30-31 four speed.
- October 8th, 2014, 10:55 am
- Forum: AA Ford Discussion
- Topic: Reproduction Express tailgate
- Replies: 3
- Views: 3475
Re: Reproduction Express tailgate
what was the asking price ?
- October 1st, 2014, 4:42 pm
- Forum: AA Buy and Sell
- Topic: !928 AA Express spare wheel carrier needed
- Replies: 14
- Views: 7477
Re: !928 AA Express spare wheel carrier needed
The drawing were some that I did on my computer program (MS Visio). They were not done for the purpose of reproduced. They were just done for AA'ers to be able to identify them. It would be interesting to hear what the approximate cost would be to have one reproduced. have you worked on a drawing f...
- September 14th, 2014, 10:56 am
- Forum: AA Ford Discussion
- Topic: Windshield Swing Arm Bracket 82A Cab
- Replies: 7
- Views: 5784
Re: Windshield Swing Arm Bracket 82A Cab
would all of hardware parts be nickel plated ? The following is unique to the 82-A, 79-A, 85-A, and 150-A. All of these body types use the same hinge pillar set up. Assuming the windshield frame swing arm brackets are as shown in the photo below, then the following applies: The width between the hin...
- August 28th, 2014, 3:07 pm
- Forum: AA Ford Discussion
- Topic: 28-29 aa floormat
- Replies: 11
- Views: 6048
Re: 28-29 aa floormat
I have emailed brattons and this is my reply To be honest I am really not sure. The only way I would do this is if they were all sold and I had at least a 50% non-refundable deposit. An idea of the price The 30-31 style came it at about $70 per mat, so I would expect the 28-29 to be a similar price...
- August 27th, 2014, 5:53 pm
- Forum: AA Ford Discussion
- Topic: 28-29 aa floormat
- Replies: 11
- Views: 6048
Re: 28-29 aa floormat
I have yet to see a 1928 AA with emergency brakes. I have a December 1928 chassis which still has the left side hand brake. My 2/7/29 dated chassis has the left side hand brake. As for the floor mats, I spoke to Jeff at Bratton's in January and he had a dozen 30/31 starburst pattern mats made with ...
- August 17th, 2014, 6:00 pm
- Forum: AA Buy and Sell
- Topic: Looking for a Warford?
- Replies: 18
- Views: 10001
Re: Looking for a Warford?
yes, january 29 firewall stamp and february 29 frame stamp.
Bob C wrote:Are you sure you don't have an early 1930, they used the same
sheet metal as the 28-29 till mid 30. Does the cross member over
the rear axle have a hump in it or is it flat.
Bob
- August 17th, 2014, 4:54 pm
- Forum: AA Buy and Sell
- Topic: Looking for a Warford?
- Replies: 18
- Views: 10001
Re: Looking for a Warford?
so the one listed was originally built for the 28/29 three speed ? my early 29 has been modified with 30/31 four speed, front and rear axles. Chris re-read his question.... :) It doesn't make any difference. They are different but one for a 3 speed will work with a 4 speed with the right combination...
- August 17th, 2014, 2:22 pm
- Forum: AA Buy and Sell
- Topic: Looking for a Warford?
- Replies: 18
- Views: 10001
Re: Looking for a Warford?
for three speed, or four ?
Chris Haynes wrote:http://houston.craigslist.org/pts/4556538243.html
- August 1st, 2014, 3:59 pm
- Forum: AA Buy and Sell
- Topic: 1929 Drum Tail Light Bakelite Socket
- Replies: 10
- Views: 5839
Re: 1929 Drum Tail Light Bakelite Socket
do the replacements fit and work correctly ?
- July 15th, 2014, 6:04 pm
- Forum: AA Ford Discussion
- Topic: pictures
- Replies: 19
- Views: 9182
Re: pictures
Post subject: pictures
- July 6th, 2014, 3:42 pm
- Forum: AA Ford Discussion
- Topic: Welting on door location??
- Replies: 6
- Views: 3647
Re: Welting on door location??
macswoods wrote:more pics sorry last 2 are side ways
- June 15th, 2014, 6:27 pm
- Forum: AA Buy and Sell
- Topic: WANTED: Hub Puller
- Replies: 15
- Views: 8379