aa-fords.com

Bob, so then there are screw heads on the outside of the cab to hold in the wood.

Yes, the pouches in the rear corners. Not sure how the wood blocks work with them.

I am looking to put mail/map pouches in my 29 CCPU. I have the wood and the sheetmetal. Does anyone have an image or dimensions, so I can mount correctly? Anything will help. Thanks

Shelby, I have holes to patch, please post tool instructions..Thanks.

I have a BB head and I am in Massachusetts.

I have an oil leak that runs down the front of the bell housing. The leak is not huge but a leak just the same. How best to solve this??

I have a Zenith 1. As it is cast, I do not possess the skills to weld it.

Guys, I broke one of the ears off my carborator where it mounts to the intake manifold. I tried JB Weld thought I did a good job but when I went to put it on, I put very little force, hand tighten bolts and the part cracked. It is still on the truck and does run,, but I don't feel good running it th...

I have six hole wheel hub caps, can you send pix of pto pump and linkage?

Do you have the metal frame for the stake bed and just want to make the rails that go around the truck? I used 6/4 oak for my pickets and 3/4 oak for the slates. The pickets fit the hole in the metal frame, no over hang. The slates are 7 inches wide( buttom slate), 5 inches wide (middle slate) and f...

is this what you want to build?

I have a four speed transmission and with it a spot for a 6 hole PTO. I recently purchased a 6 hole PTO and thought it would just bolt on. Not the case. The PTO stuck out a bit, I was not alarmed as I thought I could engineer a space the accommodate the gap. Well turns out the gears don't mesh well,...

Yes, I am interested. Send me a message and we can get the shipping and all worked out. Thanks.

I am interested, could anyone tell me how I can use this, I have a '29 stake bed. My tranny has the six bolt cover, ever e the pro goes. Thanks

Yes, only a little, and it is bluish, have to have cap off to notice. Thanks again for the support.