aa-fords.com

I plan on buying the complete springs with covers installed from Lebarron & Bonney What is the premium for doing it that way? They don't post the price on their web site. Just this notation. "Upholstery Service: LeBaron Bonney will expertly cover your old springs, or you can buy new spring...

No.

I plan on buying the complete springs with covers installed from Lebarron & Bonney

Looks like it was built to fit an A. But not by Henry.

Stamping new numbers is illegal and not only can you lose the vehicle you can go to jail.

From one extreme to the other. To some people this is a hobby. To others it is their retirement fund. ;-) First we read; "I have both pieces and the special U Joint to go from a four speed to a 3 speed driveshaft is NOS. Not cheap." Then; "you can have them for whatever you think is a...

All I needed to find when installing my Warford was the U joint. The Warford bolted right to the the bearing retainer on my May 1930 AA Four Speed.

The part is a rear bearing retainer (not carrier). It is hard to find because it is not the standard production bearing retainer used by Ford. It was part of the coupling shaft released in 1932 which allowed the shaft to be removed without removing the rear axle. I hope you find one! If it is a '32...

I am looking for a transmission bearing carrier for a 4 speed transmission to a Warford auxilliary transmission. I also need a u joint 4 speed spline to 3 speed spline. Pictures are attached and part numbers are on the photos. Thanks, Randy What is "Special" about the rear bearing carrier...

Have you tried removing the pedals from the shaft, cleaning and greasing them? Spray Aerokroil ( http://kanolabs.com/ ) around the throwout bearing sleeve to get it workin. Grease the throwout shaft going through the bellhousing. I musunderstood when you said your clutch was stuck. You should have s...

A stuck clutch can be easily freed with only a jack. Firmly chalk the front wheels. Put a floor jack under the center of the rear end and raise the rear tires off the ground. Start the engine. Put truck in gear. Bring the engine up to speed. Hold clutch pedal to the floor and have somebody drop the ...

marcom1931 wrote:Knuck and Neil, thanks for the information. Knuck could you email the company's phone number or email address.
Thanks,
Michael
508-528-2840
bergevine@comcast.net

Sorry, I don't have it. Meets shows up at swap meets all over the west coast.

AA1826250 under that was A2732811 Hmmmn. I think we need photographs here. AA1826250 is a Model AA truck built during June 1929. A2732811 is a Model A car built during December 1929. If both numbers are on the same pad on the block you most likely have a December, '29 A engine that was transplanted ...

Meets Ford Parts in So Cal carries them. I see them at swap meets.

I would be interested in the flat bed on either truck. I have a 1930 131" wb with the same rear end as pictured on the truck without the "Ford" script. Do you know what he wants for any or all of the misc. pieces? I live in CA and could pick up the parts. Thanks for the great find. I...