Search found 480 matches

by birdacre
January 30th, 2017, 11:12 am
Forum: AA Ford Discussion
Topic: AA express bed strips
Replies: 6
Views: 4980

AA express bed strips

has anyone to date ordered these strips that were in the works about a year ago. do they have the proper indent around the wheel wells and the flared ends on tailgate end? any input appreciated. thank you, kevin
by birdacre
January 29th, 2017, 7:32 pm
Forum: AA Ford Discussion
Topic: battery box thread type
Replies: 3
Views: 2814

Re: battery box thread type

it is the original box. funny thing... fine thread does not want to go on? makes me think it is machine thread. any ideas?
by birdacre
January 29th, 2017, 5:32 pm
Forum: AA Ford Discussion
Topic: battery box thread type
Replies: 3
Views: 2814

battery box thread type

i have a 28 AA. the battery box has threaded posts or rods on 2 corners to accept the tie down. what thread is this? machine?? not coarse, not fine, any ideas?
by birdacre
December 11th, 2016, 7:52 am
Forum: AA Buy and Sell
Topic: 1928 FORD AA WIRE WHEEL
Replies: 6
Views: 10870

Re: 1928 FORD AA WIRE WHEEL PHOTOS

i posted some photos on ebay under ford model a wheels. hope the photos help. Item picture

Ford 1928 AA Wire Wheel (322356030699) thank you, kevin
by birdacre
December 3rd, 2016, 12:53 pm
Forum: AA Buy and Sell
Topic: 1928 FORD AA WIRE WHEEL
Replies: 6
Views: 10870

Re: 1928 FORD AA WIRE WHEEL

anyone have an idea what a wheel like this is worth? just want to find a fair price for both sides. if anyone is from ma or ct i could bring it to the powder mill show on sunday in enfield ct???
by birdacre
November 20th, 2016, 6:02 am
Forum: AA Buy and Sell
Topic: 1928 FORD AA WIRE WHEEL
Replies: 6
Views: 10870

Re: 1928 FORD AA WIRE WHEEL

i am all set with my roof wood. i wish i needed some but my wood is good. how is your truck project coming? hope all is well. kevin
by birdacre
November 16th, 2016, 12:21 pm
Forum: AA Buy and Sell
Topic: 1928 FORD AA WIRE WHEEL
Replies: 6
Views: 10870

1928 FORD AA WIRE WHEEL

I HAVE ONE VERY NICE WIRE WHEEL. IT HAS BEEN SAND BLASTED AND PAINTED BLACK WITH GREY RETAINING RING. I AM IN CT. WOULD LIKE TO GET WHAT IT IS WORTH. ANY IDEAS???? JUST WANT IT TO BE USED. THANK YOU, KEVIN
by birdacre
November 6th, 2016, 6:26 am
Forum: AA Ford Discussion
Topic: 28 AA fluid capacities
Replies: 7
Views: 7744

28 AA fluid capacities

looking for the proper amount of oil for transmission, worm drive rear end. i know some say fill it till it flows out, i would like to know if this was the factory recommendation. also the top ball bearing at end of worm drive. is this to be packed with grease or filled with oil. thank you. kevin
by birdacre
August 22nd, 2016, 3:03 pm
Forum: AA Ford Discussion
Topic: 28 model a instrument light
Replies: 1
Views: 2141

28 model a instrument light

i have a nice light that came with my truck. seems to turn and pop outward. i assume this is the switch? push in for contact and out to break circuit. cap does not want to come off to install light. do not want to force it. seems so simple yet confusing. any ideas. thank you, kevin
by birdacre
August 22nd, 2016, 9:42 am
Forum: AA Buy and Sell
Topic: WTB headlight bucket. 28 ccpu
Replies: 4
Views: 4546

Re: WTB headlight bucket. 28 ccpu

i would want black to be original on my truck, thank you though. kevin
by birdacre
August 21st, 2016, 10:39 am
Forum: AA Buy and Sell
Topic: WTB headlight bucket. 28 ccpu
Replies: 4
Views: 4546

WTB headlight bucket. 28 ccpu

anyone have one they want to sell in good condition. my driver's side one is slight out of round and seems to have a memory and does not want to be corrected. one cracked lens is enough. thank you. kevin
by birdacre
August 19th, 2016, 5:47 pm
Forum: AA Ford Discussion
Topic: disintegrated drain plug seat any ideas????
Replies: 3
Views: 3076

disintegrated drain plug seat any ideas????

took off my oil pan, brazed holes, cleaned up. installed. 1 year later go to add oil. tighten up drain plug and out comes the plug and seat. looks like it was soldered in. appeared perfect when i had it apart. any ideas, rubber stopper drain plugs? epoxy kits that actually hold? ideas to repair that...
by birdacre
August 2nd, 2016, 7:35 am
Forum: AA Ford Discussion
Topic: ccpu door bumper placement
Replies: 7
Views: 7218

Re: ccpu door bumper placement

your truck has real nice patina. thank you very much for your help. hope all is well, kevin
by birdacre
August 1st, 2016, 7:54 pm
Forum: AA Ford Discussion
Topic: ccpu door bumper placement
Replies: 7
Views: 7218

Re: ccpu door bumper placement

thank you for your time and photos. that helps a lot. the last photo almost looks like metal? seems like it should be rubber, just like the one on door post. must be photo angle. none the less, please confirm. thank you again. kevin
by birdacre
July 31st, 2016, 3:15 pm
Forum: AA Ford Discussion
Topic: roof material and seat slats
Replies: 4
Views: 4602

Re: roof material and seat slats

thank you once again neil. i have yet to see this product listed in the "roof" sections of the catalogues. they list others but not this. very strange. anyone else out there have any ideas? thank you neil. kevin oh, any ideas on door bumpers. do they just press in? seems like a weird set u...