aa-fords.com

In Arizona the 1929 commercial plates had a P or S. Stood for solid or air type tires. They were taxed differently. Mac..

One more question, with the 1/8 inch dia 7018 welding rod , what amperage would I need to use ? I have an AC welder that will go to 100 amps, is OK ??? Mac....

I need to weld new front frame horns on my 29 AA,(got em from Fordman 88, NICE<thanks) What welding rod would be recommended to use to do the job ? The pieces will be attached behind the front cross member. Mac...

Has any one ever come up for a source for the spring and the pointed bolt ? I need both.
Any one out there have ether or both ?? Mac...

I would like it a bit behind the crossmember.My front crossmember was broken and was welded in so the noun holes are thrashed. I have another front member. Let me know. My frme horns were bent flat and busted. Mac....

Wow, my 29 frame horns are bent . Would like to have it , but am in Arizona. ..mac

Thank you, NEIL...

The cabs are the same for the pick up and the double A. Both frames are the same just one you will have to spot weld together. Mac....

I looked on Macks parts site and found 2 listings. AA65027- $59.75 for AA delivery rear doors.(in 4 pieces) A65027- $32.75 for
28 to early 30 cab rear window.(1 piece frame) mine came as the whole 1 piece frame and fits, came with fasteners. Snyders part # A-37639-APU #31.95
Mac..

be real careful those venturis are fragile .

Yup, I just rebuilt the 4 speed in my late 29 and it was wet inside, the gears looked ok--BUT. The 3 roller bearings were rusted to the shafts,thus the shafts were badly pitted. If you are going to DRIVE the old AA you got to rebuild it right. Later you will only have to do it all over again, and I ...

here you go, works for me maybe not you. it depends where your # is stamped. my AA is a 1929 October
Mac.....

On two of my model A's I have cut a small bit of the metal off the running board splash shield over the serial number. So I can see the number by taking the floor board out to see it. A lot easier than pulling the cab up or off. Just my take. Mac......

Like your floor plate. But I could 't make out the measurements for the cutout for the emergency brake handle. Thanks, this happens when "I" got old. Mac.......

I bought front cowl panels, lower door patch panels &body /top wood kits from Howell's. Had to do some work to get them to fit. They shorter me one of the body blocks. I called 5 times before I got a human was told they would send it Right out. It took a good 6 weeks & 3 more phone calls &am...