aa-fords.com

My guess is you have some stuck valves that wouldn't let the cam turn and stripped the gear. You can change the gear without pulling the radiator. The gear is held on with a nut that take a special tool to get it off. Most of them have been messed up by people using a chisel to remove them. If you c...

Possible stripped cam gear. Pull a spark plug out and see if the valves are opening
and closing as you crank the engine by hand.

Bob

You probably have a 28-29 Bevel gear rear axle.

Bob

The starter could be locked up, it's fairly common. Put the truck in high gear and
try rocking it back and forth.

Bob

Neil, The 32 parts book shows AA-7222-B was changed to BB-7222.

Bob

The part number is BB-7222. You might try Bert's, Little Dearborn, or Joblot.

Bob

Ford used the same tower from 29-42. I have repaired the tower by reaming the hole over size
and making a stepped pin.

Bob

Whats wrong with your tower?

Bob

Don't know if this will help, it is from the May '28 Service Bulletins

Bob

This is from Snyder's catalog for 28 with left hand brake.

Bob

This link is to a thread on Ford Barn about restamped firewalls.
http://www.fordbarn.com/forum/showthrea ... ht=restamp

Bob

Says it needs the threads cleaned, looks like there wiped out to me.

Bob

Bob E, the picture was on Ebay.

Bob

That's a 82-B probably late 30. The blue Ford emblem on the radiator would be 30 not 31.
I think the single bar bumper is later 30. How about some pictures of the front wheels, back
of the bed, and steering column where is mounts to the gas tank or dash.
The picture is a 1930 82A


Bob

Bratton's has the clutch inspection cover for the early '28.
http://www.brattons.com/product.asp?P_I ... &PT_ID=all

Bob