Search found 753 matches

by KimVanOrder
February 20th, 2021, 3:21 pm
Forum: AA Ford Discussion
Topic: Bevel Gear Rear End V-Bearing Question
Replies: 4
Views: 4224

Re: Bevel Gear Rear End V-Bearing Question

I'm no expert, but I would use it. I can see no reason not to.. I would think the new bearing is an "improvement" that was Made..
by KimVanOrder
February 13th, 2021, 4:09 pm
Forum: AA Buy and Sell
Topic: 28-29 AA speedometer cable grommets
Replies: 6
Views: 5838

Re: 28-29 AA speedometer cable grommets

I also need a speedo grommet for my early '28 truck frame and am considering part number 9600K219 from McMaster-Carr. Take a look, it is for 3/16 thick material (good) but for a 1-3/8" diameter hole. My frame crossmember hole is 1-1/8" diameter. So I'm thinking that since you have to spli...
by KimVanOrder
February 6th, 2021, 5:36 pm
Forum: AA Ford Discussion
Topic: Worm drive tag
Replies: 8
Views: 6525

Re: Worm drive tag

Maybe,, Just to drive you nuts!!!! :lol: :lol:
by KimVanOrder
February 4th, 2021, 7:47 am
Forum: AA Buy and Sell
Topic: Wanted: 1930-31 Wheels
Replies: 4
Views: 4628

Re: Wanted: 1930-31 Wheels

In need of a total of 7 1930-1931 AA truck wheels and locking rings (6 running + 1 spare) Need at least 4 for rolling chassis. Left mine out in the elements for several years and rusted to point of useless (lesson learned) :oops: Located in CA bay area - prefer within 150 miles for pickup Good Luck...
by KimVanOrder
February 3rd, 2021, 3:14 pm
Forum: AA Ford Discussion
Topic: starter grind?
Replies: 1
Views: 3135

Re: starter grind?

I don't know of any specific amount. Just try one washer thickness then two, etc. until you get what you want. Then you have two choices, Either shim the Bendix that amount or the entire starter. Hold it!!!! :shock: :shock: Shimming the starter out , pulls the Bendix into the ring gear. You need to ...
by KimVanOrder
January 31st, 2021, 8:32 am
Forum: AA Ford Discussion
Topic: Worm drive tag
Replies: 8
Views: 6525

Re: Worm drive tag

It may be to show the gear ratio has been changed from what is stamped on the housing.. So you will have to check the ratio. Can do via counting drive shaft rotations to wheel rotation. Be sure to keep the tag!!!
by KimVanOrder
January 20th, 2021, 6:03 pm
Forum: AA Buy and Sell
Topic: Utilli TT overdrive
Replies: 5
Views: 9084

Re: Utilli TT overdrive

here is what the TT trany looks like.
model-tt-1927-ford-truck-with-rare-3-speed-rear-auxiliary-transmission-lk-9.jpg
model-tt-1927-ford-truck-with-rare-3-speed-rear-auxiliary-transmission-lk-9.jpg (39.54 KiB) Viewed 9060 times
by KimVanOrder
January 20th, 2021, 5:50 pm
Forum: AA Buy and Sell
Topic: Utilli TT overdrive
Replies: 5
Views: 9084

Utilli TT overdrive

Utilli TT transmission: Have a working over-under-1 to 1. Transmission that I'm not using. I took it off of a 29 AA. It was connected directly to the rear axel. If interested, make an offer..
by KimVanOrder
January 16th, 2021, 6:03 pm
Forum: AA Ford Discussion
Topic: 1931 Long Running Board Questions
Replies: 7
Views: 6348

Re: 1931 Long Running Board Questions

Wow! Your fenders are too shiny!!! :lol:

There, you got some feed back. Not worth anything, but something.. :D
by KimVanOrder
January 12th, 2021, 11:48 am
Forum: AA Ford Discussion
Topic: Front Radiator Splash Shield Felt Question
Replies: 4
Views: 4478

Re: Front Radiator Splash Shield Felt Question

It must be a repo. If the 3/8" is too much, Try to slice it to fit. Or make your own 'pads'. Then glue it in place. When it is all together I don't think you can see it so no problem. I believe it is there just to prevent rattles. Some times you just gotta get creative!! :shock:
by KimVanOrder
January 12th, 2021, 5:53 am
Forum: AA Ford Discussion
Topic: Front Radiator Splash Shield Felt Question
Replies: 4
Views: 4478

Re: Front Radiator Splash Shield Felt Question

If i remember correctly I ended up gluing mine in. As far as visible? I don't have a clue. But I have a '28 so it may be different..
by KimVanOrder
January 11th, 2021, 11:18 am
Forum: AA Ford Discussion
Topic: 30/31 Ring Gear Question
Replies: 4
Views: 4245

Re: 30/31 Ring Gear Question

If it was mine, I'd file / grind it to fit. I think the spider gears are so slopy that there should be no issues.
by KimVanOrder
January 11th, 2021, 11:17 am
Forum: AA Ford Discussion
Topic: 30/31 Ring Gear Question
Replies: 4
Views: 4245

Re: 30/31 Ring Gear Question

If it was mine, I'd file / grind it to fit. I think the spider gears are so slopy that there should be no issues.
by KimVanOrder
January 3rd, 2021, 3:12 pm
Forum: AA Buy and Sell
Topic: locked up rusty transmission
Replies: 7
Views: 6488

Re: locked up rusty transmission

Give it a try!! If your worried about it getting thru to the clutch, I would not worry too much. Can't hurt anything.. Fill it up, and rotate things around. Read instructions. how long to soak is key. Longer the better... Let us know how it goes. If all fails, revert to what the other guys said. Tak...
by KimVanOrder
December 26th, 2020, 3:59 pm
Forum: AA Ford Discussion
Topic: Cotter pins
Replies: 9
Views: 8017

Re: Cotter pins

please E-mail to kimlvanorder@aol.com. also please.. Thanks and happy new yr... :D :D :D :D :D