aa-fords.com

There are sever thinks that can cause the engine to over heat. I'm just going to hit on one thing. FAN BELT, Make sure you have the correct tention ? Next make sure tranny is in neutral, next under the hood try to rotate the engine with the fan, notice to see if there is any slippage on the crank sh...

Marty, I would remove the assy. from the back of engine and bring to a vise to hold the assy. Rotate the shaft as far as possible each way and check to see it the shalf is bent or binding. slide the shaft side to side, you may need to remover the return spring to do this. Make sure the shaft is not ...

The part # BB-5715-S for 1932-1934 big trucks. I looking at an old book listing for $16.95 probably more now. The Ford Parts Store "Joblot Automotive. Inc. PH.# 1-800-221-0172 or www.joblotauto.com Also order your self a parts cat. Shelby, Sacramento.

No, I had a problem with the computer coming back up the last time I brought it it the repair shop. It would not turn on when I got home. I called a computer expert in Virginia, he said it was fixing to go out. The only the he said was to turn it off over night and it may come back up. Which it did ...

Well, I lost the rest of it all a couple days ago. Had a power outage for about 40 minutes. When the power came back on my computer was gone. Had to replaced this time. Would not resessatate . The is first post on new computer. Haven't got it figured out yet Shelby, Sacramento

I bought a 1929 open cab pickup that sat in a field for many-many years. I knew the truck when it belonged to a guy that had it before this owner. The truck back in the 50's was running good back then. As I remember the truck had no paint or very little. Any way I bought the pick-up. All 5 tires and...

I've already restored the oval speed-o-meter. Someone had taken it apart and did notput it together correctly. the input shaft would not turn and was not all way in. So I totally took it apart,cleaned and lubed and reassembled. all the parts were inthe right places, free and turned easily. I replace...

DSCN0802.JPG I bought an original pop-out ign. switch with no key. I also got 4 other original non pop-out switches for $20. 3 horn rods for $6 and an oval speed-o-meter for $5. The original pop-out I had re keyed to the key that fit the door looks and rumble seat lock on my L-31 coupe. Turned out ...

I cleaned a 30 -31 gas tank I put a gallon of swimming pool acid and a gallon of course and and attached the tank to my cement mixer and let it run about 20 minutes. Drained the acid rinsed out the sand and flushed with baking soda and water and rinsed. I used a gas tank etching and sealer. Turned o...

Several months ago and over the years I've used all kinds of chemicals to clean parts. I get the chemicals on my hands and where ever. I've used muradic acid with out gloves. The thing is I got something on my silver wedding band. It caused a reaction around my ring. So I put my ring on the other ha...

I have this 28-29 model AA that has this set up on both sides the frame,under the cowl. They both look the same and looks factory. Has anyone saw this before. This is the only one that I've ever seen. It has a channel under both sides.

I had problems with logging -in and staying logged-in. If I typed a long post I would get dropped out when I hit the submit and loose a post that I spent an hour or more to type in was gone. Here is what I did to solve this. I would write a few lines then submit. then come back and submit a few more...

Leave the hole as is! and don't worry, they are all like that, don't know why Shelby, Sacramento.

Chris, Looks like you and I are the only two. Been wanting to meet you. I met Bob C here in Sacramento a few yrs. ago. I'll be wearing My AA club tee-shirt.And VIET_NAM Vet.cap (green) Shelby, Sacramento.
My cell # 318-792-6419

Mac, To the best of my knowledge There is a retainer or screw that holds the main drive. It's been three yrs. seems you have to go through a different way check that way as an option. Shelby