Hi Tom. Can you tell us how do you put gas in the tank? Is the gas gauge about 2" in diameter like other gauges? I had the same idea except I'll make mine out of 16 ga steel, if so where can I buy the sending unit and gauge?
thanks nick
Search found 79 matches
- June 13th, 2010, 4:57 am
- Forum: AA Ford Discussion
- Topic: Drilling Frame Flanges
- Replies: 12
- Views: 6213
- June 3rd, 2010, 6:47 am
- Forum: AA Ford Discussion
- Topic: Clutch disc diameters?
- Replies: 8
- Views: 4390
Clutch disc diameters?
I own a 1929 AA, when I took it apart, it had a 10" clutch disc in it. I also own a 1930 AA swamp buggy, when I took it apart, it had a 10' clutch disc in it. It is my under standing that all the A automobiles feft the factory with 9' clutch discs. Is it safe to assume that all the AA's left th...
- April 24th, 2010, 5:37 pm
- Forum: AA Ford Discussion
- Topic: Hydraulic Conversion
- Replies: 49
- Views: 21758
Re: Hydraulic Conversion
Hi guys. I own a 29 AA , I haven't started the restoration process yet. I have measured the bolt pattern with calipers and I'm sure its 5 on 6 7/8 circle. I also have a 30 AA, the rims are different but the bolt pattern is the same. I've done alot of thinking on brakes. Recently on the Fordbarn site...
- January 19th, 2010, 4:02 pm
- Forum: AA Ford Discussion
- Topic: 29 AA flat bed wood
- Replies: 11
- Views: 5865
29 AA flat bed wood
Did the wood on a 29 AA flat bed measure 1 1/4" thick and 7" wide? It looks like there was 9 boards and there was 8 metal strips? Were there any metal strips used on the two outside boards closest to the side pockets or did they use only carriage bolts? Was the wood rough sawn or was it pl...