aa-fords.com

My helmet has a shield. I'll probably just wear that. It only affect me when the outside temp is below 50*

The seat is hard mounted to the pump, which is hard mounted to the frame. I don't think the seat is going anywhere...

Thanks, it sounds like this windshield, while aftermarket, is the same size as the factory one. I guess I'll keep it....

Frank

I have an early 28 AA that was built as a firetruck and it appears to be either a 75A or 76A body. The door hinge posts are clearly part of the cowl, but the hinge holes have never been drilled for hinges. The windshield on this truck is an aftermarket folding one that I like very much, but it is ve...

Here are some photos. Your link does not show the differences between AA-5020 cross member and the AA-5020-B but this one looks the same as your drawings. That is, in my uneducated eye...

Pardon me for not knowing the differences between two different frames offered in 1928. I thought the left side brake handle indicated early 28. I'll get a photo today...

That's $250.

Reduced to $20.

Is it possible that the hole where the adjuster goes through is egg shaped? Need to bush the hole???

Frank

It says above that it's free!

Here ya go...

Sent PM

When they shipped the unit to me, the shift mechanism was a cable set-up with the shift plunger attached to the original gear shift lever by using clamps. With this, connected via cable, it would avoid the dual high pedals.

Frank

I don't think my pump takes up any more space than the dual high does. I have one on the shelf and it extends down below the shaft centerline about the same as my pump. The shifter is attached via a special cast aluminum adapter supplied by Mitchell. The adapter bolts to the shift tower and is used ...

I posted this on the Ford Barn, but since I said I'd report back here, here it is... Sorry for the long post... I thought I should bring everyone up to speed on my Mitchell Overdrive installation in my early 28 AA Firetruck. This is a 36% overdrive unit with a 3 speed transmission and a high speed r...