When I got my 29 AA cc, the rear fenders weren't on the truck. I have two rear fenders. Theres just one problem, one fender measures 68" over all length. The othe fender measure 71" over all length. Whick one is supposed to fit my 29 AA and what does the other one fit?
thanks nick
29 AA fender help
- Neil Wilson
- Posts: 3071
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 29 AA fender help
Attached is a picture with measurements of an AA rear fender for the '28 through mid '30 AA. It is 46-5/16" overall width. Post pictures of the two rear fenders you are talking about. Maybe they can be identified! The two lengths which you list are much too long for any AA rear fender. Maybe you are talking about the long AA running boards?
- Attachments
-
- xAA-16439 Fender - left rear b.jpg (61.42 KiB) Viewed 2890 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: 29 AA fender help
When I measured the two fenders, I used a steel tape and went up and over the top and down.
Fender #1 is 42" horizontal and 23" tall, 12" wide. It has a cut out for the splash apron 1.5" x 9" and has the two holes for the running boards 6" on center, this cutout fits my splash apron.
Fender #2 is 43" horizontal and 24" tall, 12" wide. It has a cutout for the splash apron 3" x 9" and the two holes for the running boards are 7" on center, this cutout doesnt fit my splash apron.
Can anyone identify what I've got?
Fender #1 is 42" horizontal and 23" tall, 12" wide. It has a cut out for the splash apron 1.5" x 9" and has the two holes for the running boards 6" on center, this cutout fits my splash apron.
Fender #2 is 43" horizontal and 24" tall, 12" wide. It has a cutout for the splash apron 3" x 9" and the two holes for the running boards are 7" on center, this cutout doesnt fit my splash apron.
Can anyone identify what I've got?
- Neil Wilson
- Posts: 3071
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 29 AA fender help
I suggest that you post pictures of the fenders you have!
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/