I had to take the cab off my 32 AAB to find the VIN. It was in the same place as a 31.ModelAkid wrote: note: in 1932 Henry started stamping the frame VIN on the top left side just in front of the cowl where it is easily seen. In other words, just a bit forward of where Model A frame VINs are stamped.
California registration rule
- TomH
- Posts: 181
- Joined: September 16th, 2009, 2:11 pm
- Body Type: pickup
- Model Year: 1928
- Location: Eastern PA
Re: California registration rule
Need rear fenders and running boards for 1932 131" single wheel Express Body
-
- Posts: 478
- Joined: June 3rd, 2013, 6:15 pm
- Body Type: 186-B stake
- Model Year: 1931
- Location: LHC Arizona & UP Michigan
Re: California registration rule
I had '33 and '34 Ford trucks and the VIN was in front of the cowl. I guess the location changed sometime between '31 and '33.
Re: California registration rule
Especially for those of you who live in CA ( or deal with the CA DMV), a suggestion: when dealing with a lower level DMV person who turns out to be an 'idiot' : ask to speak to their Supervisor, & if the Supervisor is also an 'idiot', keep going up the chain until you get to the Manager. By this time, as long as you've been polite & have ALL the available paperwork(including the appropriate DMV sections & codes) for the manager to refer to(if it gets that far 'up the chain'), you usually will be able to get any problems resolved in your favor, as they just want you to 'go away', as you've almost certainly guaranteed each of the lower levels at least some sort of 'unsatisfactory performance' rating for that day for being unable to handle the problem. There was a serious amount of attention devoted to this kind of problem over on "The HAMB", as we're not the only ones who deal with these issues!!!
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: California registration rule
Or simply do your DMV work at AAA.
-
- Posts: 478
- Joined: June 3rd, 2013, 6:15 pm
- Body Type: 186-B stake
- Model Year: 1931
- Location: LHC Arizona & UP Michigan
Re: California registration rule
AAA is absolutely the best way to go, although they cannot do all DMV services, such as YOM plates. The AAA DMV services alone justify the annual membership fee. We have towing insurance with AAA and when our motorhome got 2 flat tires in the Middle of Nowhere on a Sunday afternoon, AAA sent a tire repair guy from a town 40 miles away with new tires and changed them on the side of the highway. They sent the tire repair guy because our motorhome is too big to "tow" on a flatbed truck. We only paid for the tires.
3 cheers for AAA!
3 cheers for AAA!
-
- Posts: 108
- Joined: June 18th, 2014, 10:22 pm
- Body Type: express
- Model Year: 1930
- Location: N. Calif.
Re: California registration rule
Hi, Can AAA verify the VIN numbers on the frame for DMV?
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: California registration rule
Yes.......RustydoubleA wrote:Hi, Can AAA verify the VIN numbers on the frame for DMV?
-
- Posts: 44
- Joined: January 21st, 2008, 4:45 pm
- Model Year: 1930
- Location: Palo Alto, Ca
Re: California registration rule
FYI Not all AAA clubs or offices are created equal. Most AAA offices will do the basic DMV renewals and registrations changes but not old registrations and the verifying VIN numbers, they will refer you to a lien service or contractor.
-
- Posts: 47
- Joined: April 25th, 2014, 9:30 pm
- Body Type: none, stakeside wtd
- Model Year: 1929
- Location: North Bay Area, Calif.
Re: California registration rule
California DMV can choose to order that you take it to CHP and no one else. (CHP Has dedicated officers, by appointment only, in some areas and is backed up a month in my area. They will no longer come to you.) If DMV leaves it up to you, you may use a Licensed VIN Verifier, which may be found at many car dealerships. My Ford dealer did my AA for no charge when I took it to him on a trailer. My DMV was quite uninformed and drug me through a knothole!
Bill.
Bill.
-
- Posts: 7
- Joined: June 24th, 2013, 5:17 am
- Body Type: wrecker
- Model Year: 1929
- Location: North Woodstock, NH
Re: California registration rule
Although I do not live in CA currently, I will tell you about a trick I used in NJ. Get a small piece of brass, about 1 X 3 inches, and round off the corners. Using 1/4 inch letter/number punches, punch your engine number on the brass piece. Then pop rivet this item on the firewall. Paint it if you want.
- Chris Haynes
- Posts: 2204
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: California registration rule
A great idea except any vehicle inspector will know that pop rivets weren't in use during Model A production. Cut rivets short and stick them in the holes of your tag. A spot of braze on the back will hold the rivits in place in place. Then stick it on the firewall with a bit of silicone. When done getting your paperwork done remove it.Kanc wrote:Although I do not live in CA currently, I will tell you about a trick I used in NJ. Get a small piece of brass, about 1 X 3 inches, and round off the corners. Using 1/4 inch letter/number punches, punch your engine number on the brass piece. Then pop rivet this item on the firewall. Paint it if you want.