Something missing?
-
- Posts: 267
- Joined: December 27th, 2008, 9:30 pm
- Body Type: flatbed
- Model Year: 1930
Something missing?
I don't have a photo right at the moment to show you but here's my question. On the rider side of the engine, back side of the timing front cover there is a round plate about 3 inches in dia. This plate is held on to the front cover by I'm thinking six screws. Did something go there?
Re: Something missing?
A picture would help but if I am reading your description right it sounds like an aftermarket timing gear side cover with provisions for mounting a governor.
-
- Posts: 267
- Joined: December 27th, 2008, 9:30 pm
- Body Type: flatbed
- Model Year: 1930
Re: Something missing?
The second photo, what is it? Its pot metal, a wire coming out of the center, looks like it is a lid to something. I don't know where it came off.
- Attachments
-
- model aa 091.jpg (61.86 KiB) Viewed 4234 times
-
- Posts: 267
- Joined: December 27th, 2008, 9:30 pm
- Body Type: flatbed
- Model Year: 1930
Re: Something missing?
Sorry about that. This is the plate I was wondering about. The other photo is the pot metal thing
- Attachments
-
- model aa 090.jpg (95.7 KiB) Viewed 4232 times
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: Something missing?
This appears like the area where the governer on a commercial vehicle whould have been.
Re: Something missing?
The plate with the wire coming out of it is a distributor cap top. Surely it is bakelite or some similar insulating material instead of pot metal.
The other pic looks like a place to mount a governor or some other gear driven acessory.
The other pic looks like a place to mount a governor or some other gear driven acessory.
-
- Posts: 267
- Joined: December 27th, 2008, 9:30 pm
- Body Type: flatbed
- Model Year: 1930
Re: Something missing?
thank you both. I have alot to learn about this truck.