Hi folks! Just testing to see if I can post a pic.
Larry
legrandaa
Front Crossmember
Front Crossmember
- Attachments
-
- My cracked front crossmember and old time repair job.
- Picture 016.jpg (5.04 KiB) Viewed 3556 times
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Front Crossmember
Your pictures is 100 pixels/inch. But it is only 1" wide. You need to figure out how to make a picture which is 8" wide and 72 pixels/inch. I use Abobe Photoshop to modify my pictures.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Front Crossmember
Thanks, Neil. I will give that a try.
Larry
BTW, my 88A bed should arrive today. I'll post a picture or two.
Larry
BTW, my 88A bed should arrive today. I'll post a picture or two.
Re: Front Crossmember
Here's another try at posting a picture. I resized it so hopefully it will be viewable.
Larry
legrandaa
Larry
legrandaa
- Attachments
-
- Picture 021.jpg (74.91 KiB) Viewed 3496 times
- rsierk
- Posts: 95
- Joined: February 23rd, 2005, 7:27 pm
- Body Type: 185-B
- Model Year: 1931
- Location: Christiana PA
Re: Front Crossmember
That is a good viewable size. Good Job!
Re: Front Crossmember
Thanks for the reply! I am glad to hear the picture is useable. My name is Larry from Le Grand, CA and I have a 1930 (I believe), since I have not had the cab off yet. The engine in the picture is now running, although it needs lots of work. Here is another shot of the same engine cleaned up a little bit with the same starter and generator cleaned, too.
Larry
Larry
- Attachments
-
- Model AA Engine.JPG (75.08 KiB) Viewed 3393 times