30/31 drive shaft bearing race
30/31 drive shaft bearing race
Can the bearing race in the 30/31 torque tube at the U-joint end of the drive shaft be replaced like the 28/29's, or is it cut into the torque tube?
Re: 30/31 drive shaft bearing race
Sorry guys, I used the wrong terminology on that thingee that may cause some confusion. It's actually called a "sleeve" and not a race, although it acts like one. The race is a race of course of course and the race is on the surface of the drive shaft..of course.
Mark
Mark
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: 30/31 drive shaft bearing race
The AA-4655 race is a separate parts (like the 28/29 AA and the A). So, it can be removed. Referring to a Ford Parts Price List allows you to determine this fact (as well as many other great facts).
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: 30/31 drive shaft bearing race
I don't have a Ford Parts Price List, but I did find my answer in the Ford Service Bulletin for November 1930, plus other useful info. In the Ford Service Bulletins Complete, it is on page 513.
I can't find a vendor or supplier that carries the AA-4655 sleeve. Any of you guys have any info?
Thanks for your reply Neil.
I can't find a vendor or supplier that carries the AA-4655 sleeve. Any of you guys have any info?
Thanks for your reply Neil.
-
- Posts: 603
- Joined: May 15th, 2010, 2:34 pm
- Body Type: dump
- Model Year: 1930
- Location: Eastern, CT
Re: 30/31 drive shaft bearing race
Good luck finding one. I haven't seen any for sale anywhere.
Red
Red
Re: 30/31 drive shaft bearing race
Hi Red, I may have a handle on this as I've been doing a lot of parts research while looking for my U-joint. I spent weeks on line looking for that U-joint with no results, then suddently, NOS U-joints were coming out of the woodwork.
I'll post my results on the AA-4656 bearing and sleeve at a later date. NOS Ford said he had a set, but wanted $500.00 for it! Hershey Swap Meet next month would be a good bet too, but I can't afford to go there.
These parts are out there, it just takes a lot of work prying the closet door open to find them.
I've been getting a lot of referals from one guy to the next and a lot of them panned out!
Mark
I'll post my results on the AA-4656 bearing and sleeve at a later date. NOS Ford said he had a set, but wanted $500.00 for it! Hershey Swap Meet next month would be a good bet too, but I can't afford to go there.
These parts are out there, it just takes a lot of work prying the closet door open to find them.
I've been getting a lot of referals from one guy to the next and a lot of them panned out!
Mark
-
- Posts: 603
- Joined: May 15th, 2010, 2:34 pm
- Body Type: dump
- Model Year: 1930
- Location: Eastern, CT
Re: 30/31 drive shaft bearing race
I have noticed that NOS Ford prices do seem to be a bit high, but then again they are nos parts. Just my my $0.02.
Red
Red