Is there anyone that could provide me with the center line to center line dimensions of the rear rack stake pockets (externally mounted) for an 88-a platform body?
The rear cross member on this truck was replaced and for sure the pocket on the right is way off which makes me question the location of the others.
Rear rack dimensions
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Rear rack dimensions
- Attachments
-
- rear-rack-dims.jpg (11.39 KiB) Viewed 2994 times
- Brian T
- Posts: 400
- Joined: December 27th, 2008, 9:57 am
- Body Type: 82A
- Model Year: 1929
- Location: San Diego
Re: Rear rack dimensions
Hello John,
Here is a picture of my #6 crossmember on my 29 AA which I believe is designated a 188-A, the dimentions are,---total width of the bed is 73-1/4",--- from the left side to the center of the first pocket is 11" - from there it is 18-1/2" to the center of the next pocket,--- and then to the center of the crossmember is 7".
Hope this helps, Brian.
Here is a picture of my #6 crossmember on my 29 AA which I believe is designated a 188-A, the dimentions are,---total width of the bed is 73-1/4",--- from the left side to the center of the first pocket is 11" - from there it is 18-1/2" to the center of the next pocket,--- and then to the center of the crossmember is 7".
Hope this helps, Brian.
- Attachments
-
- STAKE POCKETS.jpg (87.78 KiB) Viewed 2953 times
Nothing can be made fool proof, fools are ingenious bastards.
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Re: Rear rack dimensions
Hello Brian,
Thanks for the photo and dimensions of your #6 crossmember this will be a big help!
Best Regards, John
Thanks for the photo and dimensions of your #6 crossmember this will be a big help!
Best Regards, John
- gunmetal
- Posts: 304
- Joined: August 21st, 2010, 7:28 am
- Body Type: 188-A
- Model Year: 1929
- Location: Milford, Indiana
Re: Rear rack dimensions
Thanks Brain my 188-A I bout does not have a rear cross member eighter. Don't for get about the 2 traigle brackets just like the front one's. What does everybody do about the spare tire carrier latch? If you would send me pics of this I would be real happy. terry_rose2002@yahoo.com
- gunmetal
- Posts: 304
- Joined: August 21st, 2010, 7:28 am
- Body Type: 188-A
- Model Year: 1929
- Location: Milford, Indiana
Re: Rear rack dimensions
what size board on outer edge are 7 1/4" wide, the inside ones 7"my stakes are wood.