I think we have a Canadian Cab ? any info out there?
- Harry Lipki
- Posts: 103
- Joined: January 26th, 2011, 4:32 pm
- Body Type: AA Chassis
- Model Year: 1928
- Location: London Ontario , Canada
I think we have a Canadian Cab ? any info out there?
I do believe we have a something called a Canadian cab on our AA Chassis -- Is there any info out there on this ?
and how rare are they ? Only in Canada EH
and how rare are they ? Only in Canada EH
- Attachments
-
- on display.JPG (45.93 KiB) Viewed 7187 times
Re: I think we have a Canadian Cab ? any info out there?
I have seen photos of AA cabs like posted by guys from Australia. It doesn't seem like too many have survived. It is my understanding that the most of the trucks sold to commonwealth countries were Canadian built. In my opinion, each one of these AAs Canadian, American, or Russian are rare in their own respect. There are lots of different variations that have survived, but most in fairly low numbers. Rarity doesn't seem to add any value to AAs though.
- Harry Lipki
- Posts: 103
- Joined: January 26th, 2011, 4:32 pm
- Body Type: AA Chassis
- Model Year: 1928
- Location: London Ontario , Canada
Re: I think we have a Canadian Cab ? any info out there?
Not that cocerned about the value -- Real cool to know the history -- an older post from farmerden shows a Canadian cab which is virtually identicle to ours . Any info is always nice to have so I can give an answer to questions asked at shows .
-
- Posts: 1442
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: I think we have a Canadian Cab ? any info out there?
Harry,
The "C" in your engine number means it is Canadian, the US made
only have "AA" not "CAA" like yours.
Bob
The "C" in your engine number means it is Canadian, the US made
only have "AA" not "CAA" like yours.
Bob
Re: I think we have a Canadian Cab ? any info out there?
Most of the Canadian AA's had cabs built by Brantford Coach, thus they were called Brantford Cabs. They are a little different then the American built cabs being they are mostly wood with sheet metal covering and that goes for the doors also. The American AA's had the same cab as the pickup truck much more metal with far less wood than the Canadian Cabs. That is why the Canadian AA's with the Brantford Cabs are scarce. I am from Canada and in 1969 my late father bought an early 1929 Model AA ford with original wood spoke wheels that had the Brantford Cab. The wood in the cab was badly deteriorated so it was taken apart in in 1971 and then put at the back of his garage. He had a friend who had offered to do the woodwork but it never happened. The truck is still in the corner of the garage the way it was left in 1971 but other than the cab it is in excellent condition, the 60 year old tires are still holding air Early in 2009 I suggested to my father that we look for a good American cab and put the truck back together and he thought that would be a good idea. So I started looking but unfortunatly a year ago Dec. my father had a massive heart attack and passed away after a short time at hospital. I am now planning to find a good cab and finish the truck in his memory.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: I think we have a Canadian Cab ? any info out there?
I have a 1928 Open Cab from Winnipeg. It is all metal except the seat supports.
Re: I think we have a Canadian Cab ? any info out there?
Thanks Chris but I am looking for a 28/29 closed cab complete with doors.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: I think we have a Canadian Cab ? any info out there?
jimyAA wrote:Thanks Chris but I am looking for a 28/29 closed cab complete with doors.
I am not selling my cab. I was simply pointing out that it wasn't metal over wood construction.
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: I think we have a Canadian Cab ? any info out there?
Good Plan and a great memorial to your POP. Wish you luck in your search.jimyAA wrote: ...Early in 2009 I suggested to my father that we look for a good American cab and put the truck back together and he thought that would be a good idea. So I started looking but unfortunatly a year ago Dec. my father had a massive heart attack and passed away after a short time at hospital. I am now planning to find a good cab and finish the truck in his memory.
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
-
- Posts: 52
- Joined: January 28th, 2011, 6:26 am
- Body Type: 82a
- Model Year: 1929
- Location: Windber Pa.
Re: I think we have a Canadian Cab ? any info out there?
jimy-doing my truck for the same reason Radar
-
- Posts: 69
- Joined: June 11th, 2008, 4:28 pm
- Model Year: 1928
- Location: Vancouver, Canada
- Contact:
Re: I think we have a Canadian Cab ? any info out there?
One feature of the Canadian Fords was the use of Robertson("Square-drive" to you Americans ) screws throughout the vehicle.
Apparently H Ford determined that the use of Robertson-head screws would save something in the order of 40 man-hours per vehicle in assembly (I might be blowing smoke here, but it was an astounding number) and approached the Robertson company in Ontario for the patents.
Ford wanted to buy the rights, but Robertson would only go so far as to 'license' them for use in the USA, so no deal.
Apparently H Ford determined that the use of Robertson-head screws would save something in the order of 40 man-hours per vehicle in assembly (I might be blowing smoke here, but it was an astounding number) and approached the Robertson company in Ontario for the patents.
Ford wanted to buy the rights, but Robertson would only go so far as to 'license' them for use in the USA, so no deal.
- vtwinsideways
- Posts: 452
- Joined: March 19th, 2010, 6:37 pm
- Body Type: 82-A, 88-A
- Model Year: 1929
- Location: Taylorville IL
Re: I think we have a Canadian Cab ? any info out there?
...And Henry didn't crush him???Rob MacDonald wrote:One feature of the Canadian Fords was the use of Robertson("Square-drive" to you Americans ) screws throughout the vehicle.
Apparently H Ford determined that the use of Robertson-head screws would save something in the order of 40 man-hours per vehicle in assembly (I might be blowing smoke here, but it was an astounding number) and approached the Robertson company in Ontario for the patents.
Ford wanted to buy the rights, but Robertson would only go so far as to 'license' them for use in the USA, so no deal.
"I get all my exercise jumping to conclusions."
Luke in Illinois
Luke in Illinois
-
- Posts: 69
- Joined: June 11th, 2008, 4:28 pm
- Model Year: 1928
- Location: Vancouver, Canada
- Contact:
Re: I think we have a Canadian Cab ? any info out there?
You lot weren't an empire yet, and we were!vtwinsideways wrote:...And Henry didn't crush him???Rob MacDonald wrote:One feature of the Canadian Fords was the use of Robertson("Square-drive" to you Americans ) screws throughout the vehicle.
Apparently H Ford determined that the use of Robertson-head screws would save something in the order of 40 man-hours per vehicle in assembly (I might be blowing smoke here, but it was an astounding number) and approached the Robertson company in Ontario for the patents.
Ford wanted to buy the rights, but Robertson would only go so far as to 'license' them for use in the USA, so no deal.
- spectria
- Posts: 1874
- Joined: May 15th, 2008, 9:53 pm
- Body Type: Mail Truck, Stakebed
- Model Year: 1931
- Location: Quincy, Ca.
Re: I think we have a Canadian Cab ? any info out there?
Yea, what happened with that... I think Henry happened...Rob MacDonald wrote:You lot weren't an empire yet, and we were!vtwinsideways wrote:...And Henry didn't crush him???Rob MacDonald wrote:One feature of the Canadian Fords was the use of Robertson("Square-drive" to you Americans ) screws throughout the vehicle.Apparently H Ford determined that the use of Robertson-head screws would save something in the order of 40 man-hours per vehicle in assembly (I might be blowing smoke here, but it was an astounding number) and approached the Robertson company in Ontario for the patents.Ford wanted to buy the rights, but Robertson would only go so far as to 'license' them for use in the USA, so no deal.
Dave in Quincy, Ca. I love Pics!!!! Post them All!!!
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
Join the Ford Model AA Truck Club - membership form at http://www.fmaatc.org
-
- Posts: 69
- Joined: June 11th, 2008, 4:28 pm
- Model Year: 1928
- Location: Vancouver, Canada
- Contact:
Re: I think we have a Canadian Cab ? any info out there?
That, and the fact that a certain country used to arrive 'fashionably late' whenever there was a war on...Yea, what happened with that... I think Henry happened...